GoPro_ESP32_TFT_Touch-Control

Allows control and monitoring of four cameras at the same time

Look also https://github.com/sepp89117/GoEasyPro_Android

Tested with GoPro Hero 5 black an Hero 8 black

Using TFT_eSPI from https://github.com/Bodmer/TFT_eSPI

I use it with an ILI9341 320x240 TFT display with SPI

A short demonstration on YouTube: https://youtu.be/x3VdKUKrlSc

Installation

1. Download and extract the source into Arduino projects folder
2. Download and install TFT_eSPI from https://github.com/Bodmer/TFT_eSPI
3. Config TFT_eSPI (docs: https://github.com/Bodmer/TFT_eSPI/blob/master/docs/ESP-IDF/Using%20ESP-IDF.txt)
   • i have commented out #include <User_Setup.h> and uncommented #include <User_Setups/Setup42_ILI9341_ESP32.h> in User_Setup_Select.h and #define TOUCH_CS 5 in Setup42_ILI9341_ESP32.h
4. Make sure your wiring matches the pin definitions in in Setup42_ILI9341_ESP32.h or in your own TFT_eSPI setup
5. Install esp32 with your board manager in Arduino IDE (actually version 2.0.14)
6. In Arduino IDE select your ESP32 board and the COM port connected to
7. Compile and upload