GitHub - rcarlsen/ArduinoLogger: Simple firmware for using the openLog with an Arduino

rcarlsen / ArduinoLogger Public

Notifications You must be signed in to change notification settings
Fork 0
Star 4

Simple firmware for using the openLog with an Arduino

Notifications

Name		Name	Last commit message	Last commit date
Latest commit History 3 Commits
ArduinoLog.xcodeproj		ArduinoLog.xcodeproj
.gitignore		.gitignore
Makefile		Makefile
README		README
SoftwareSerial.cpp		SoftwareSerial.cpp
SoftwareSerial.h		SoftwareSerial.h
core.a		core.a
main.cpp		main.cpp
main.elf		main.elf
main.hex		main.hex

Repository files navigation

This is just a basic Arduino sketch for sending sensor readings to an openLog via serial.

It also works just fine at sending the sensor data over serial to a computer. Data is presented in CSV format. 

If using the XCode project, be sure to edit the Makefile to reflect the location of the Arduino IDE application. The Makefile looks for any usb to serial devices connected, so it's best to only connect one at a time when uploading the sketch.

You'll also need to install AVRMacPack/CrossPack from:
http://www.obdev.at/products/crosspack/index.html

Make sure to update the AVRDUDE_DIR var in the Makefile to point to the CrossPack installation, too.

In XCode, go to Build > Clean all targets to compile and upload in one shot.

Good luck!
-Robert