Pull the ocmb targets outside proc #32

deepakala-k · 2024-02-11T10:18:37Z

The ocmb targets are separate chip. And in odyssey, the ocmb targets have its own pib targets, iic targets. So modelling them outside the proc so that the hierarchy is inline with the actual hardware.

Tested and working as expected.
ecmdquery chips
cage 0
node 0
slot 0
pu
p[0,1,2,3]
odyssey
p[2,3,26,27]

The ocmb targets are separate chip. And in odyssey, the ocmb targets have its own pib targets, iic targets. So modelling them outside the proc so that the hierarchy is inline with the actual hardware. Tested and working as expected. ecmdquery chips cage 0 node 0 slot 0 pu p[0,1,2,3] odyssey p[2,3,26,27]

deepakala-k · 2024-02-11T10:46:35Z

ocmb1 {
compatible = "ibm,power-ocmb", "ibm,power10-ocmb";
index = <0x21>;
ATTR_CHIP_ID = <0>;
ATTR_CLOCKSTOP_ON_XSTOP = [ 00 ];
ATTR_EC = [ 00 ];
ATTR_FAPI_NAME = "ocmb:k0:n0:s0:p33 ";
ATTR_FAPI_POS = <33>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_IO_TANK_PLL_BYPASS = [ 00 ];
ATTR_LOCATION_CODE = "Ufcs-P0-C23 ";
ATTR_MRU_ID = <0x00>;
ATTR_NAME = [ 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 4B 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/ocmb_chip-1 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_SPI_BUS_DIV_REF = [ 00 41 ];
ATTR_TYPE = [ 4B ];

fsi {
index = <0x01>;
};

pib {
index = <0x01>;

adc0 {
compatible = "ibm,power10-adc";
index = <0x84>;
ATTR_FAPI_NAME = "generici2cslave:k0:n0:s0:p132 ";
ATTR_FAPI_POS = <132>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 55 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/generic_i2c_device-4 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 00 ];
ATTR_TYPE = [ 55 ];
};

adc1 {
compatible = "ibm,power10-adc";
index = <0x85>;
ATTR_FAPI_NAME = "generici2cslave:k0:n0:s0:p133 ";
ATTR_FAPI_POS = <133>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 55 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/generic_i2c_device-5 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 01 ];
ATTR_TYPE = [ 55 ];
};

gpio_expander2 {
compatible = "ibm,power10-gpio_expander";
index = <0x86>;
ATTR_FAPI_NAME = "generici2cslave:k0:n0:s0:p134 ";
ATTR_FAPI_POS = <134>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 55 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/generic_i2c_device-6 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 02 ];
ATTR_TYPE = [ 55 ];
};

gpio_expander3 {
compatible = "ibm,power10-gpio_expander";
index = <0x87>;
ATTR_FAPI_NAME = "generici2cslave:k0:n0:s0:p135 ";
ATTR_FAPI_POS = <135>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 55 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/generic_i2c_device-7 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 03 ];
ATTR_TYPE = [ 55 ];
};

mem_port0 {
compatible = "ibm,power10-memport";
index = <0x42>;
ATTR_CHIPLET_ID = [ FF ];
ATTR_CHIP_UNIT_POS = [ 00 ];
ATTR_FAPI_NAME = "ocmb.mp:k0:n0:s0:p33:c0 ";
ATTR_FAPI_POS = <66>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_MRU_ID = <0x00>;
ATTR_PHYS_BIN_PATH = [ 24 01 00 02 00 4B 01 4C 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/ocmb_chip-1/mem_port-0 ";
ATTR_REL_POS = [ 00 ];
ATTR_TYPE = [ 4C ];

dimm0 {
compatible = "ibm,power10-dimm";
index = <0x84>;
ATTR_FAPI_NAME = "dimm:k0:n0:s0:p132 ";
ATTR_FAPI_POS = <132>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_LOCATION_CODE = "Ufcs-P0-C23 ";
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 03 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/dimm-2 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 00 ];
ATTR_TYPE = [ 03 ];
};
};

mem_port1 {
compatible = "ibm,power10-memport";
index = <0x43>;
ATTR_CHIPLET_ID = [ FF ];
ATTR_CHIP_UNIT_POS = [ 01 ];
ATTR_FAPI_NAME = "ocmb.mp:k0:n0:s0:p33:c1 ";
ATTR_FAPI_POS = <67>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_MRU_ID = <0x00>;
ATTR_PHYS_BIN_PATH = [ 24 01 00 02 00 4B 01 4C 01 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/ocmb_chip-1/mem_port-1 ";
ATTR_REL_POS = [ 01 ];
ATTR_TYPE = [ 4C ];

dimm0 {
compatible = "ibm,power10-dimm";
index = <0x86>;
ATTR_FAPI_NAME = "dimm:k0:n0:s0:p134 ";
ATTR_FAPI_POS = <134>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_LOCATION_CODE = "Ufcs-P0-C23 ";
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 03 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/dimm-3 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 00 ];
ATTR_TYPE = [ 03 ];
};
};

perv1 {
compatible = "ibm,ody-chiplet";
index = <0x01>;
ATTR_CHIPLET_ID = [ 01 ];
ATTR_FAPI_NAME = "ocmb.perv:k0:n0:s0:p33:c1 ";
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_MRU_ID = <0x00>;
ATTR_PHYS_BIN_PATH = [ 24 01 00 02 00 4B 01 2C 01 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/ocmb_chip-1/perv-1 ";
ATTR_TYPE = [ 2C ];
};

perv8 {
compatible = "ibm,ody-chiplet";
index = <0x08>;
ATTR_CHIPLET_ID = [ 08 ];
ATTR_FAPI_NAME = "ocmb.perv:k0:n0:s0:p33:c8 ";
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_MRU_ID = <0x00>;
ATTR_PHYS_BIN_PATH = [ 24 01 00 02 00 4B 01 2C 08 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/ocmb_chip-1/perv-8 ";
ATTR_TYPE = [ 2C ];
};

pmic0 {
compatible = "ibm,power10-pmic";
index = <0x84>;
ATTR_FAPI_NAME = "pmic:k0:n0:s0:p132 ";
ATTR_FAPI_POS = <132>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 4E 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/pmic-4 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 00 ];
ATTR_TYPE = [ 4E ];
};

pmic1 {
compatible = "ibm,power10-pmic";
index = <0x85>;
ATTR_FAPI_NAME = "pmic:k0:n0:s0:p133 ";
ATTR_FAPI_POS = <133>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 4E 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/pmic-5 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 01 ];
ATTR_TYPE = [ 4E ];
};

pmic2 {
compatible = "ibm,power10-pmic";
index = <0x86>;
ATTR_FAPI_NAME = "pmic:k0:n0:s0:p134 ";
ATTR_FAPI_POS = <134>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 4E 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/pmic-6 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 02 ];
ATTR_TYPE = [ 4E ];
};

pmic3 {
compatible = "ibm,power10-pmic";
index = <0x87>;
ATTR_FAPI_NAME = "pmic:k0:n0:s0:p135 ";
ATTR_FAPI_POS = <135>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 23 01 00 02 00 4E 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/pmic-7 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 03 ];
ATTR_TYPE = [ 4E ];
};

power_ic0 {
compatible = "ibm,power10-pmic";
index = <0x84>;
ATTR_FAPI_NAME = "power_ic:k0:n0:s0:p132 ";
ATTR_FAPI_POS = <132>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/power_ic-4 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 00 ];
ATTR_TYPE = [ 00 ];
};

power_ic1 {
compatible = "ibm,power10-pmic";
index = <0x85>;
ATTR_FAPI_NAME = "power_ic:k0:n0:s0:p133 ";
ATTR_FAPI_POS = <133>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/power_ic-5 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 01 ];
ATTR_TYPE = [ 00 ];
};

power_ic2 {
compatible = "ibm,power10-pmic";
index = <0x86>;
ATTR_FAPI_NAME = "power_ic:k0:n0:s0:p134 ";
ATTR_FAPI_POS = <134>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/power_ic-6 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 02 ];
ATTR_TYPE = [ 00 ];
};

power_ic3 {
compatible = "ibm,power10-pmic";
index = <0x87>;
ATTR_FAPI_NAME = "power_ic:k0:n0:s0:p135 ";
ATTR_FAPI_POS = <135>;
ATTR_HWAS_STATE = [ 00 00 00 00 00 ];
ATTR_PHYS_BIN_PATH = [ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ];
ATTR_PHYS_DEV_PATH = "physical:sys-0/node-0/power_ic-7 ";
ATTR_POS = <0xFFFFFFFF>;
ATTR_REL_POS = [ 03 ];
ATTR_TYPE = [ 00 ];
};
};
};

ocmb2 {
compatible = "ibm,power-ocmb", "ibm,power10-ocmb";
index = <0x22>;
ATTR_CHIP_ID = <0>;

deepakala-k · 2024-02-11T10:47:44Z

The ocmb target is created after the bmc target

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Pull the ocmb targets outside proc #32

Pull the ocmb targets outside proc #32

deepakala-k commented Feb 11, 2024

deepakala-k commented Feb 11, 2024

deepakala-k commented Feb 11, 2024

Pull the ocmb targets outside proc #32

Are you sure you want to change the base?

Pull the ocmb targets outside proc #32

Conversation

deepakala-k commented Feb 11, 2024

deepakala-k commented Feb 11, 2024

deepakala-k commented Feb 11, 2024