HCL/DDL bump 2024-10-01

2E/2E__PS1000L__nutdrv_qx__2.8.1__01.dev

@@ -0,0 +1,119 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut-ddl/issues/41
+# DEVICE:URL:VENDOR: https://2e.ua/en/products/2e-ps1000l-1000va-800w-dc-24v-2xschuko-1xc13/
+
+# DEVICE:COMMENT:
+# It has RJ45 and USB ports, comes with UPSmart utility.
+# Screenshots and logs from the stock utility are included
+# in the `nut-ddl` ticket.
+#
+# Device dump generated by ./nut-ddl-dump.sh on Sat, 08 Jun 2024 20:34:25 +0300
+# DEVICE:EOC
+
+# DEVICE:COMMENT-BLOCK:UPSCONF:
+# [2e-ps1000l]
+#   driver = "nutdrv_qx"
+#   port = "auto"
+#   vendorid = "0001"
+#   productid = "0000"
+#   # Certain overrides were needed:
+#   # LiFePO4 2x 12V
+#   override.battery.voltage.nominal="24"
+#   default.battery.voltage.low = "20"
+#   default.battery.voltage.high = "29.2"
+#   # 2 hours 24 minutes at 100% load (800W)
+#   # 4 hours 48 minutes at 50% load (400W)
+#   runtimecal="8640,100,17280,50"
+#   # 6.5 hours charge time
+#   chargetime="24000"
+#   idleload="10"
+# DEVICE:EOC
+
+# :; upsc 2e-ps1000l
+battery.charge: 76
+battery.runtime: 47039
+battery.voltage: 27.1
+battery.voltage.high: 29.2
+battery.voltage.low: 20
+battery.voltage.nominal: 24
+device.type: ups
+driver.debug: 0
+driver.flag.allow_killpower: 0
+driver.name: nutdrv_qx
+driver.parameter.chargetime: 24000
+driver.parameter.default.battery.voltage.high: 29.2
+driver.parameter.default.battery.voltage.low: 20
+driver.parameter.idleload: 10
+driver.parameter.override.battery.voltage.nominal: 24
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.product: ATCL FOR UPS
+driver.parameter.productid: 0000
+driver.parameter.runtimecal: 8640,100,17280,50
+driver.parameter.serial: ATCL FOR UPS
+driver.parameter.synchronous: auto
+driver.parameter.vendor: ATCL FOR UPS
+driver.parameter.vendorid: 0001
+driver.state: quiet
+driver.version: 2.8.2
+driver.version.data: Megatec 0.07
+driver.version.internal: 0.36
+driver.version.usb: libusb-1.0.27 (API: 0x100010a)
+input.current.nominal: 3.6
+input.frequency: 49.9
+input.frequency.nominal: 50
+input.voltage: 223.0
+input.voltage.fault: 0.0
+input.voltage.nominal: 220
+output.voltage: 224.0
+ups.beeper.status: disabled
+ups.delay.shutdown: 30
+ups.delay.start: 180
+ups.firmware: V4.00
+ups.load: 14
+ups.productid: 0000
+ups.status: OL
+ups.temperature: 26.0
+ups.type: offline / line interactive
+ups.vendorid: 0001
+
+# DEVICE:COMMENT-BLOCK:FIXME:UPSRW: 2e-ps1000l
+# [driver.debug]
+# Current debug verbosity level of the driver program
+# Type: NUMBER
+# Value: 0
+#
+# [driver.flag.allow_killpower]
+# Safety flip-switch to allow the driver daemon to send UPS shutdown command (accessible via driver.killpower)
+# Type: NUMBER
+# Value: 0
+#
+# [ups.delay.shutdown]
+# Interval to wait after shutdown with delay command (seconds)
+# Type: RANGE NUMBER
+# Option: "12-600" SELECTED
+#
+# [ups.delay.start]
+# Interval to wait before (re)starting the load (seconds)
+# Type: RANGE NUMBER
+# Option: "0-599940" SELECTED
+# DEVICE:EOC
+
+# DEVICE:COMMENT-BLOCK:FIXME:UPSCMD: 2e-ps1000l
+# Instant commands supported on UPS [2e-ps1000l]:
+#
+# beeper.toggle - Toggle the UPS beeper
+# driver.killpower - Tell the driver daemon to initiate UPS shutdown; should be unlocked with driver.flag.allow_killpower option or variable setting
+# driver.reload - Reload running driver configuration from the file system (only works for changes in some options)
+# driver.reload-or-error - Reload running driver configuration from the file system (only works for changes in some options); return an error if something changed and could not be applied live (so the caller can restart it with new options)
+# driver.reload-or-exit - Reload running driver configuration from the file system (only works for changes in some options); exit the running driver if something changed and could not be applied live (so service management framework can restart it with new options)
+# load.off - Turn off the load immediately
+# load.on - Turn on the load immediately
+# shutdown.return - Turn off the load and return when power is back
+# shutdown.stayoff - Turn off the load and remain off
+# shutdown.stop - Stop a shutdown in progress
+# test.battery.start - Start a battery test
+# test.battery.start.deep - Start a deep battery test
+# test.battery.start.quick - Start a quick battery test
+# test.battery.stop - Stop the battery test
+# DEVICE:EOC

2E/2E__PS1000L__nutdrv_qx__2.8.1__02.dev

@@ -0,0 +1,59 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut-ddl/issues/41
+# DEVICE:URL:VENDOR: https://2e.ua/en/products/2e-ps1000l-1000va-800w-dc-24v-2xschuko-1xc13/
+
+# DEVICE:COMMENT:
+# It has RJ45 and USB ports, comes with UPSmart utility.
+# Screenshots and logs from the stock utility are included
+# in the `nut-ddl` ticket.
+#
+# This device dump was copied from upsc manually in the ticket.
+# DEVICE:EOC
+
+# :; upsc 2e-ps1000l
+battery.charge: 79
+battery.runtime: 48969
+battery.voltage: 27.3
+battery.voltage.high: 29.2
+battery.voltage.low: 20
+battery.voltage.nominal: 24
+device.type: ups
+driver.debug: 0
+driver.flag.allow_killpower: 0
+driver.name: nutdrv_qx
+driver.parameter.chargetime: 24000
+driver.parameter.default.battery.voltage.high: 29.2
+driver.parameter.default.battery.voltage.low: 20
+driver.parameter.idleload: 10
+driver.parameter.override.battery.voltage.nominal: 24
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.product: ATCL FOR UPS
+driver.parameter.productid: 0000
+driver.parameter.runtimecal: 8640,100,17280,50
+driver.parameter.serial: ATCL FOR UPS
+driver.parameter.synchronous: auto
+driver.parameter.vendor: ATCL FOR UPS
+driver.parameter.vendorid: 0001
+driver.state: quiet
+driver.version: 2.8.2
+driver.version.data: Megatec 0.07
+driver.version.internal: 0.36
+driver.version.usb: libusb-1.0.27 (API: 0x100010a)
+input.current.nominal: 3.6
+input.frequency: 50.0
+input.frequency.nominal: 50
+input.voltage: 221.0
+input.voltage.fault: 0.0
+input.voltage.nominal: 220
+output.voltage: 221.0
+ups.beeper.status: disabled
+ups.delay.shutdown: 30
+ups.delay.start: 180
+ups.firmware: V4.00
+ups.load: 14
+ups.productid: 0000
+ups.status: OL
+ups.temperature: 26.0
+ups.type: offline / line interactive
+ups.vendorid: 0001