Skip to content

mbentley/docker-omada-controller

BranchesTags

Repository files navigation

mbentley/omada-controller

Docker image for TP-Link Omada Controller to control TP-Link Omada Hardware

For references on running a legacy v3 or v4 controller, see the README for v3 and v4. See the tag archive_v3_v4 for a snapshot of the code that includes the v3 and v4 artifacts as they have been removed as of July 2, 2024.

Table of Contents

Image Tags

⚠️ Warning ⚠️ Do NOT run the armv7l (32 bit) images. Upgrade your operating system to arm64 (64 bit) unless you accept that you're running an outdated MongoDB and a base operating system with unpatched vulnerabilities! See the Known Issues readme for more information.

Multi-arch Tags

For a full tag list, search the Docker Hub tags list. The following tags have multi-arch support for amd64, armv7l, and arm64 and will automatically pull the correct tag based on your system's architecture:

Tag(s) Major.Minor Release Current Version
latest, 5.14 Omada Controller 5.14.x 5.14.32.3
beta, beta-5.15 Omada Controller beta 5.15.6.4
5.13 Omada Controller 5.13.x 5.13.30.8
5.12 Omada Controller 5.12.x 5.12.7

Tags with Chromium

Note: These are currently published for the amd64 architecture only. These tags extend the tags above to add Chromium which is required to generate reports from the controller.

Tag(s) Major.Minor Release
latest-chromium, 5.14-chromium Omada Controller 5.14.x
beta-chromium, Omada Controller beta
5.13-chromium Omada Controller 5.13.x
5.12-chromium Omada Controller 5.12.x

Explicit Architecture Tags

If for some reason you can't use the multi-arch tags, there are explicitly tagged images with the architecture (-amd64, -arm64, and -armv7l) appended to them. Check Docker Hub for the full list of tags.

Explicit Version Tags

If you need a specific version of the controller, starting with 5.13 and 5.14, there are explicitly tagged images with the exact version (i.e. - 5.14.32.3) in the tag name. Check Docker Hub for the full list of tags.

Archived Tags

These images are still published on Docker Hub but are no longer regularly updated due to the controller software no longer being updated. Use with extreme caution as these images are likely to contain unpatched security vulnerabilities!. See Archived Tags for v3 and v4 for details on the old, unmaintained image tags.

Tag(s) Major.Minor Release Current Version
5.9 Omada Controller 5.9.x 5.9.31
5.9-chromium Omada Controller 5.9.x 5.9.31
5.8 Omada Controller 5.8.x 5.8.4
5.8-chromium Omada Controller 5.8.x 5.8.4
5.7 Omada Controller 5.7.x 5.7.4
5.7-chromium Omada Controller 5.7.x 5.7.4
5.6 Omada Controller 5.6.x 5.6.3
5.6-chromium Omada Controller 5.6.x 5.6.3
5.5 Omada Controller 5.5.x 5.5.6
5.5-chromium Omada Controller 5.5.x 5.5.6
5.4 Omada Controller 5.4.x 5.4.6
5.4-chromium Omada Controller 5.4.x 5.4.6
5.3 Omada Controller 5.3.x 5.3.1
5.3-chromium Omada Controller 5.3.x 5.3.1
5.1 Omada Controller 5.1.x 5.1.7
5.1-chromium Omada Controller 5.1.x 5.1.7
5.0 Omada Controller 5.0.x 5.0.30

Getting Help & Reporting Issues

If you have issues running the controller, feel free to create a Help discussion and I will help as I can. If you are specifically having a problem that is related to the actual software, I would suggest filing an issue on the TP-Link community forums as I do not have access to source code to debug those issues. If you're not sure where the problem might be, I can help determine if it is a running in Docker issue or a software issue. If you're certain you have found a bug, create a Bug Report Issue.

Best Practices for Operation

Controller Backups

While you can take backups of your controller by making a copy of the persistent data, the chance of data corruption exists if you do so while the container is running as there is a database used for persistence. The best way to take backups is to use the automatic backup capabilities within the controller itself. Go to Settings > Maintenance > Backup and scroll down to Auto Backup to enable and configure the feature. These backups can be restored as a part of the installation process on a clean controller install.

Backups can also be taken manually on the same screen as the auto backup settings. This would be ideal to do before you perform an upgrade to ensure that you are able to roll back in case of issues upon upgrade as you can not move from a newer version of the controller to an older version! It will break the database and require you to do a full reinstall!

Controller Upgrades

Before performing and upgrade, I would suggest taking a backup through the controller itself. Controller upgrades are done by stopping the existing container gracefully (see the note below on this topic), removing the existing container, and running a new container with the new version of the controller. This can be done manually, with compose, or with manby other 3rd party tools which auto-update containers.

Preventing Database Corruption

When stopping your container in order to upgrade the controller, make sure to allow the MongoDB enough time to safely shutdown. This is done using docker stop -t <value> where <value> is a number in seconds, such as 60, which should allow the controller to cleanly shutdown. Database corruption has been observed when not cleanly shut down. The docker run and compose examples now include --stop-timeout and stop_grace_period which are set to 60s.

Building images

Click to expand docker build instructions

There are some differences between the build steps for amd64, arm64, and armv7l. These changes will happen automatically if you use the build-args INSTALL_VER and ARCH. For possible INSTALL_VER values, see mbentley/docker-omada-controller-url:

amd64

No build args required; set for the default build-args

docker build \
  --build-arg INSTALL_VER="5.14.32.3" \
  --build-arg ARCH="amd64" \
  -f Dockerfile.v5.x \
  -t mbentley/omada-controller:5.14-amd64 .

arm64

Only the ARCH build-arg is required

docker build \
  --build-arg INSTALL_VER="5.14.32.3" \
  --build-arg ARCH="arm64" \
  -f Dockerfile.v5.x \
  -t mbentley/omada-controller:5.14-arm64 .

armv7l

Both the ARCH and BASE build-args are required

docker build \
  --build-arg INSTALL_VER="5.14.32.3" \
  --build-arg ARCH="armv7l" \
  --build-arg BASE="ubuntu:16.04" \
  -f Dockerfile.v5.x \
  -t mbentley/omada-controller:5.14-armv7l .

Example Usage

To run this Docker image and keep persistent data in named volumes:

Using non-default ports

tl;dr: Always make sure the environment variables for the ports match any changes you have made in the web UI and you'll be fine.

If you want to change the ports of your Omada Controller to something besides the defaults, there is some unexpected behavior that the controller exhibits. There are two sets of ports: one for HTTP/HTTPS for the controller itself and another for HTTP/HTTPS for the captive portal, typically used for authentication to a guest network. The controller's set of ports, which are set by the MANAGE_*_PORT environment variables, can only be modified using the environment variables on the first time the controller is started. If persistent data exists, changing the controller's ports via environment variables will have no effect on the controller itself and can only be modified through the web UI. On the other hand, the portal ports will always be set to whatever has been set in the environment variables, which are set by the PORTAL_*_PORT environment variables.

Using port mapping

Warning: If you want to change the controller ports from the default mappings, you absolutely must update the port binding inside the container via the environment variables. The ports exposed must match what is inside the container. The Omada Controller software expects that the ports are the same inside the container and outside and will load a blank page if that is not done. See #99 for details and and example of the behavior.

docker run -d \
  --name omada-controller \
  --stop-timeout 60 \
  --restart unless-stopped \
  --ulimit nofile=4096:8192 \
  -p 8088:8088 \
  -p 8043:8043 \
  -p 8843:8843 \
  -p 27001:27001/udp \
  -p 29810:29810/udp \
  -p 29811-29816:29811-29816 \
  -e MANAGE_HTTP_PORT=8088 \
  -e MANAGE_HTTPS_PORT=8043 \
  -e PGID="508" \
  -e PORTAL_HTTP_PORT=8088 \
  -e PORTAL_HTTPS_PORT=8843 \
  -e PORT_ADOPT_V1=29812 \
  -e PORT_APP_DISCOVERY=27001 \
  -e PORT_DISCOVERY=29810 \
  -e PORT_MANAGER_V1=29811 \
  -e PORT_MANAGER_V2=29814 \
  -e PORT_TRANSFER_V2=29815 \
  -e PORT_RTTY=29816 \
  -e PORT_UPGRADE_V1=29813 \
  -e PUID="508" \
  -e SHOW_SERVER_LOGS=true \
  -e SHOW_MONGODB_LOGS=false \
  -e SSL_CERT_NAME="tls.crt" \
  -e SSL_KEY_NAME="tls.key" \
  -e TZ=Etc/UTC \
  -v omada-data:/opt/tplink/EAPController/data \
  -v omada-logs:/opt/tplink/EAPController/logs \
  mbentley/omada-controller:5.14

Using net=host

In order to use the host's network namespace, you must first ensure that there are not any port conflicts. The docker run command is the same except for that all of the published ports should be removed and --net host should be added. Technically it will still work if you have the ports included, but Docker will just silently drop them. Here is a snippet of what the above should be modified to look like:

...
  --restart unless-stopped \
  --net host \
  -e MANAGE_HTTP_PORT=8088 \
...

Optional Variables

Variable Default Values Description Valid For
MANAGE_HTTP_PORT 8088 1024-65535 Management portal HTTP port; for ports < 1024, see Unprivileged Ports >= 3.2
MANAGE_HTTPS_PORT 8043 1024-65535 Management portal HTTPS port; for ports < 1024, see Unprivileged Ports >= 3.2
PGID 508 any Set the omada process group ID ` >= 3.2
PGROUP omada any Set the group name for the process group ID to run as >= 5.0
PORTAL_HTTP_PORT 8088 1024-65535 User portal HTTP port; for ports < 1024, see Unprivileged Ports >= 4.1
PORTAL_HTTPS_PORT 8843 1024-65535 User portal HTTPS port; for ports < 1024, see Unprivileged Ports >= 4.1
PORT_ADOPT_V1 29812 1024-65535 Omada Controller and Omada Discovery Utility manage the Omada devices running firmware fully adapted to Omada Controller v4* >= 5.x
PORT_APP_DISCOVERY 27001 1024-65535 Omada Controller can be discovered by the Omada APP within the same network through this port >= 5.x
PORT_DISCOVERY 29810 1024-65535 Omada Controller and Omada Discovery Utility discover Omada devices >= 5.x
PORT_MANAGER_V1 29811 1024-65535 Omada Controller and Omada Discovery Utility manage the Omada devices running firmware fully adapted to Omada Controller v4* >= 5.x
PORT_MANAGER_V2 29814 1024-65535 Omada Controller and Omada Discovery Utility manage the Omada devices running firmware fully adapted to Omada Controller v5* >= 5.x
PORT_TRANSFER_V2 29815 1024-65535 Omada Controller receives Device Info and Packet Capture files from the Omada devices >= 5.9
PORT_RTTY 29816 1024-65535 Omada Controller establishes the remote control terminal session with the Omada devices >= 5.9
PORT_UPGRADE_V1 29813 1024-65535 When upgrading the firmware for the Omada devices running firmware fully adapted to Omada Controller v4*. >= 5.x
PUID 508 any Set the omada process user ID ` >= 3.2
PUSERNAME omada any Set the username for the process user ID to run as >= 5.0
SHOW_SERVER_LOGS true true, false Outputs Omada Controller logs to STDOUT at runtime >= 4.1
SHOW_MONGODB_LOGS false true, false Outputs MongoDB logs to STDOUT at runtime >= 4.1
SKIP_USERLAND_KERNEL_CHECK false true, false When set to true, skips the userland/kernel match check for armv7l & arm64 >= 3.2
SMALL_FILES false true, false See Small Files for more detail; no effect in >= 4.1.x 3.2 only
SSL_CERT_NAME tls.crt any Name of the public cert chain mounted to /cert; see Custom Certificates >= 3.2
SSL_KEY_NAME tls.key any Name of the private cert mounted to /cert; see Custom Certificates >= 3.2
TLS_1_11_ENABLED false true, false Re-enables TLS 1.0 & 1.1 if set to true >= 4.1
TZ Etc/UTC <many> See Time Zones for more detail >= 3.2

Documentation on the ports used by the controller can be found in the TP-Link FAQ.

Persistent Data

In the examples, there are two directories where persistent data is stored: data and logs. The data directory is where the persistent database data is stored where all of your settings, app configuration, etc is stored. The log directory is where logs are written and stored. I would suggest that you use a bind mounted volume for the data directory to ensure that your persistent data is directly under your control and of course take regular backups within the Omada Controller application itself. Previous versions of the controller (before 5.x) also used a work persistent directory omada-work which was mapped to /opt/tplink/EAPController/work inside the container where the application was deployed. This work directory is no longer needed as of 5.0.x.

Custom Certificates

By default, Omada software uses self-signed certificates. If however you want to use custom certificates you can mount them into the container as /cert/tls.key and /cert/tls.crt. The tls.crt file needs to include the full chain of certificates, i.e. cert, intermediate cert(s) and CA cert. This is compatible with kubernetes TLS secrets. Entrypoint script will convert them into Java Keystore used by jetty inside the Omada SW. If you need to use different file names, you can customize them by passing values for SSL_CERT_NAME and SSL_KEY_NAME as seen above in the Optional Variables section.

Warning - As of the version 4.1, certificates can also be installed through the web UI. You should not attempt to mix certificate management methods as installing certificates via the UI will store the certificates in MongoDB and then the /cert volume method will cease to function.

Time Zones

By default, this image uses the Etc/UTC time zone. You may update the time zone used by passing a different value in the TZ variable. See List of tz database time zones for a complete list of values in the TZ database name table column.

Unprivileged Ports

This Docker image runs as a non-root user by default. In order to bind unprivileged ports (ports < 1024 by default), you must include --sysctl net.ipv4.ip_unprivileged_port_start=0 in your docker run command to allow ports below 1024 to be bound by non-root users.

Using Docker Compose

There is a Docker Compose file available for those who would like to use compose to manage the lifecycle of their container:

wget https://raw.githubusercontent.com/mbentley/docker-omada-controller/master/docker-compose.yml
<edit the compose file to match your persistent data needs>
docker compose up -d

Omada Controller API Documentation

If you are interested in using the Omada Controller APIs to retrieve data from the controller, the latest version of the API documentation that I have found is available from the community forums in this post. I'm not able to provide support for the APIs but I've found them to be helpful for my own usage and they weren't easy to find.

Known Issues

See the Known Issues documentation for details.

About

Docker image to run TP-Link Omada Controller

Resources

Readme
Activity

Stars

725 stars

Watchers

39 watching

Forks

108 forks
Report repository

Releases

1 tags

Packages

No packages published

Contributors 13

Languages