Merge pull request #16 from dreemurrs-embedded/readme

Much more friendly readme

README.md

@@ -1,16 +1,24 @@
-# Jumpdrive for PinePhone
+# Jumpdrive
 
-This image is a swiss army knife solution for **PinePhone eMMC**.
+The swiss army knife of Pine64 devices (currently only Pinetab and PinePhone)
 
 You can use this to flash a image **directly to eMMC**, troubleshooting a broken system, and a lot more.
 
-## This project is built on:
-- [Busybox](https://busybox.net) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
-- [postmarketOS](https://postmarketos.org) scripts - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
-- [Pine64's kernel fork](https://gitlab.com/pine64-org/linux) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
-- [U-Boot](https://github.com/u-boot/u-boot) - which has [multiple licenses](https://github.com/u-boot/u-boot/tree/master/Licenses)
+### Table of Contents
+- [Installation](#installation)
+- [Building](#building)
+- [List of projects being used in Jumpdrive](#this-project-is-built-on)
+
+### Installation
+Download the latest image for your device [here](https://github.com/dreemurrs-embedded/Jumpdrive/releases)
+
+Then use dd to flash the image to an SD card. Jumpdrive is pretty small, so there is no need for a large storage SD card.
+
+Insert the SD card to the device, then boot it up, you should get a nice splash screen and you should see a new storage device after you plug the device to USB.
 
-## Building
+With the device plugged in, you can now flash a distro, or fix a unbootable installation.
+
+### Building
 
 The dependencies are:
 
@@ -31,3 +39,10 @@ Generate only the initramfs for the pinephone
 $ make -j8 all
 Generates an image for every supported platform in parallel
 ```
+
+### This project is built on:
+- [Busybox](https://busybox.net) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
+- [postmarketOS](https://postmarketos.org) scripts - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
+- [Pine64's kernel fork](https://gitlab.com/pine64-org/linux) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
+- [U-Boot](https://github.com/u-boot/u-boot) - which has [multiple licenses](https://github.com/u-boot/u-boot/tree/master/Licenses)
+