v2.0.1-beta.9

Changes since v2.0.0 include:

• make logs less verbose and improve the diagnostic uploader
• add ready to go VM images, drop the iob builds, drop the 32bit Pi3 build
• fix autogain reset for UAT SDRs
• fix out of space build error preventing some images from getting built
• further improvements of boot time for DietPi images
• add missing Env variable that broke the option to remove the config link from the map
• add a second set of DietPi images that should boot much quicker as most of the dependencies are installed at build time
• make initial autogain adjustment quicker / no more restarting the decoder to change gain
• fix dump978 when using rtl-sdr blog v4 SDR
• add an option to remove the config link from the map
• change the file name extension of backups from .zip to .backup
• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.8

Changes since v2.0.0 include:

• add ready to go VM images, drop the iob builds, drop the 32bit Pi3 build
• fix autogain reset for UAT SDRs
• fix out of space build error preventing some images from getting built
• further improvements of boot time for DietPi images
• add missing Env variable that broke the option to remove the config link from the map
• add a second set of DietPi images that should boot much quicker as most of the dependencies are installed at build time
• make initial autogain adjustment quicker / no more restarting the decoder to change gain
• fix dump978 when using rtl-sdr blog v4 SDR
• add an option to remove the config link from the map
• change the file name extension of backups from .zip to .backup
• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.7

Changes since v2.0.0 include:

• fix autogain reset for UAT SDRs
• fix out of space build error preventing some images from getting built
• further improvements of boot time for DietPi images
• add missing Env variable that broke the option to remove the config link from the map
• add a second set of DietPi images that should boot much quicker as most of the dependencies are installed at build time
• make initial autogain adjustment quicker / no more restarting the decoder to change gain
• fix dump978 when using rtl-sdr blog v4 SDR
• add an option to remove the config link from the map
• change the file name extension of backups from .zip to .backup
• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.6

Changes since v2.0.0 include:

• fix out of space build error preventing some images from getting built
• further improvements of boot time for DietPi images
• add missing Env variable that broke the option to remove the config link from the map
• add a second set of DietPi images that should boot much quicker as most of the dependencies are installed at build time
• make initial autogain adjustment quicker / no more restarting the decoder to change gain
• fix dump978 when using rtl-sdr blog v4 SDR
• add an option to remove the config link from the map
• change the file name extension of backups from .zip to .backup
• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.5

Changes since v2.0.0 include:

• further improvements of boot time for DietPi images
• add missing Env variable that broke the option to remove the config link from the map
• add a second set of DietPi images that should boot much quicker as most of the dependencies are installed at build time
• make initial autogain adjustment quicker / no more restarting the decoder to change gain
• fix dump978 when using rtl-sdr blog v4 SDR
• add an option to remove the config link from the map
• change the file name extension of backups from .zip to .backup
• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.4

Changes since v2.0.0 include:

• add a second set of DietPi images that should boot much quicker as most of the dependencies are installed at build time
• make initial autogain adjustment quicker / no more restarting the decoder to change gain
• fix dump978 when using rtl-sdr blog v4 SDR
• add an option to remove the config link from the map
• change the file name extension of backups from .zip to .backup
• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.3

Changes since v2.0.0 include:

• disable docker healthcheck for all containers (hopefully improve MLAT on pi3)
• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.2

Changes since v2.0.0 include:

• add micro feeder status info to index and stage2 settings page
• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.1-beta.1

Changes since v2.0.0 include:

• work around broken PlaneFinder container on RPi5
• re-enable tar1090 update at start
• add multi-outline for stage 2 maps
• various small UI adjustments

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)

v2.0.0

Changes since v1.3.6 include

• up ultrafeeder version for readsb debug features
• stage2: fix microsite URLs when base URL has no port
• stage2 setup: non-adsb.im micro feeders: slight UI changes / fix stage2 yml file not being created immediately
• stage2 data sharing: fix micro site with highest index not configurable
• stage2 setup: allow setting name / lat / lng / alt for non-adsb.im micro feeder (so plain port 30005 source)
• stage2 UI improvements: better explanation of the workflow, plus the ability to turn stage2 mode off again
• allow importing micro feeders that run an app install of adsb.im
• only accept known and expect environment settings when importing a micro feeder
• fix broken range and gain reset options in the UI
• build bullseye image based on 2023-02-21 Raspbian Lite image (pi3 mlat issues)
• add usb ids for RSP2, RSPDuo, RSPdx
• improve backup robustness
• small UI changes, trying to make things more intuitive
• add Raspbian bullseye based image as potential fix for pi3 mlat issues
• prune tagged images, not only dangling ones
• update to latest SDR-E containers
• fix RBfeeder fake cpu info creation issue
• escape the idiotic adsbhub key (which uses a ridiculous character set - get a grip, people)
• add UI comments about ratio of containers to SBC chosen
• limit CPU use of all 3rd party containers and FD abuse by FR24 container
• more menu tweaks
• several fixes for stage 2 aggregator handling
• introduction of a full stage 2 mode that allows separating data collection (the antenna / SDR) and data distribution (feeding the aggregators) between different systems, with one stage 2 instances collecting and sharing data from multiple (micro) feeders
• the stage 2 code is definitely a lot more 'alpha' than the rest of the code that has received a lot more testing.
• significant changes to the web UI to support integrated instances (how things used to be), micro feeders, and stage 2 instances
• beyond that, fairly significant UI overhaul with new menu organization, new, hopefully more intuitive names for the different menu entries, and a new option to upload anonymized logs for easier analysis by the developers
• removed dependency on most CDN / remote provided content (including Google Font, FontAwesome, and jQuery)
• changed the default for MLAT privacy to OFF (but made this setting very obvious at the top of the 'Data Sharing' (previously 'Aggregators') page - with a better explanation what it does.
• improve the aggregator status detection for a number of aggregators
• switched to latest Ultrafeeder container with a new readsb version that allows us to replay UAT traffic (this is part of the stage2 setup)
• (under the hood) significant changes to the storage format for config settings; it should be transparent during an upgrade, but once upgraded, a downgrade is not possible

Note

Based on the available usage information, I have significantly reduced the number of images provided here. If there's one that you need for a different SBC which is supported either by Armbian or DietPi, please post a request on the Zulip server

Warning

Images that start with adsb-im-iob can take up to 20 minutes at first boot. Images without iob in their name still can take more than 5 minutes before the web interface is available. Please be patient.

Not all images support WiFi, DietPi based images that do support WiFi (e.g. DietPi images for Raspberry Pi) require editing two files on the DOS partition included with the image BEFORE the first boot. Please look at the adsb.im FAQ for details.

Depending on the target platform, there may be multiple images available.

Some of the images are based on the DietPi Linux distribution and are designed to complete their install on boot - those are marked with iob in their name and can take a significant time (up to 20 minutes) on first boot as they download and install some of their components at that point (in return, the images are much smaller).

The remaining images have all components pre-installed, but still often take around 5 minutes until the web interface becomes available. Those are based on Raspbian (for the Raspberry Pi boards) or Armbian (all other non-iob images)