AramCon Badge 2019 Upgrade Kit

This upgrade kits add extra input buttons and a Shitty Add-On V1.69bis connector to AramCon Badge 2019.

Compiling and Flashing the Firmware

Install the following software:

1. STM32CubeProgrammer
2. Arduino IDE
3. Arduino STM32 Core

Note: if you only want to flash the firmware from a HEX file, you only need the STM32CubeProgrammer software.

Open the upgrade-kit-firmware in the Arduino IDE, and then go to "Tools" → "Board" and choose Generic STM32F0 series. Then under "Board part number" choose STM32F030F4 Demo board (internal RC oscillator). Finally, click on "Upload" (Ctrl+U) to compile and flash the firmware to the board through STM32CubeProgrammer.

Board Installation

You'll need the following hardware to secure the upgrade kit to your badge:

1. 2 x 3D Printed Spacer.
2. 2 x M2.5x18 screws with round head (longer ones will also work)
3. 2 x M2.5 Nut and washer