deploy: 59fe0d4

api/boards.json

@@ -5827,7 +5827,7 @@
             "USB-C"
         ],
         "url_path": "/board/lolin_s2_mini/",
-        "description": "<p>The LOLIN S2 Mini is a small (33.4 mm x 25.4 mm) development board. The form factor is almost the same as the well-known LOLIN D1 mini. This means that there is a high chance that the <a href=\"https://www.wemos.cc/en/latest/d1_mini_shield/index.html\">D1 Mini Shields</a> could also be uses with this board.</p><h2 id=\"technical-details\">Technical details</h2><ul>  <li>ESP32-S2FN4R2 WiFi SoC    <ul>      <li>Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz</li>      <li>Integrated 802.11 b/g/n WiFi 2.4 GHz Transceiver, up to 150 Mbps</li>      <li>Integrated RISC-V ULP Coprocessor</li>      <li>Integrated Temperature Sensor (-20 °C to 110 °C)</li>      <li>Operating Voltage: 3.0 to 3.6 V        <ul>          <li>WiFi: 310 mA (peak)</li>          <li>Modem-sleep: 12-19 mA</li>          <li>Light-Sleep: 450 µA</li>          <li>Deep-Sleep: 20-190 µA</li>        </ul>      </li>      <li>320 KB SRAM</li>      <li>4 MB Flash (embedded)</li>      <li>2 MB PSRAM (embedded)</li>      <li>16 KB SRAM in RTC (accessable by main CPU, 8 KB accessable by ULP coprocessor)</li>      <li>4 Kbit eFuse (1792 bits reserved for user data)</li>      <li>2 13-bit SAR ADCs, up to 20 channels (2 channels not available on ADC2 due to USB D+/D-)        <ul>          <li>2 8-bit DAC</li>          <li>14 touch sensing IOs</li>          <li>4 SPI (2 usable due to embedded flash &amp; PSRAM)</li>          <li>1 I2S</li>          <li>2 I2C</li>          <li>2 UART</li>          <li>1 DVP 8/16 camera interface, implemented using the hardware resources of I2S</li>          <li>1 LCD interface (8-bit serial RGB/8080/6800), implemented using the hardware resources of SPI2</li>          <li>1 LCD interface (8/16/24-bit parallel), implemented using the hardware resources of I2S</li>          <li>1 TWAI® controller compatible with ISO 11898-1 (CAN Specification 2.0)</li>          <li>LED PWM controller, up to 8 channels</li>          <li>USB OTG 1.1 controller and PHY, with host and device support</li>          <li>Cryptographic Hardware Accelerators: AES, ECB/CBC/OFB/CFB/CTR, GCM, SHA, RSA, ECC (Digital Signature)</li>        </ul>      </li>    </ul>  </li>  <li>USB-C connector, for built-in ROM USB bootloader, serial port debugging, and USB device mode</li>  <li>3.3 V regulator ME6211C33    <ul>      <li>Maximum Output Current: 500 mA （V<sub>IN</sub>＝4.3 V, V<sub>OUT</sub>＝3.3 V）</li>      <li>Dropout Voltage: 100 mV@ I<sub>OUT</sub>＝100 mA</li>      <li>Operating Voltage Range: 2V～6.0V</li>      <li>Low Power Consumption: 40 µA （typ.）</li>      <li>Standby Current: 0.1 µA （typ.）</li>    </ul>  </li>  <li>27 GPIO pins, plus <code class=\"language-plaintext highlighter-rouge\">EN</code>, <code class=\"language-plaintext highlighter-rouge\">VBUS</code>, <code class=\"language-plaintext highlighter-rouge\">3V3</code>, <code class=\"language-plaintext highlighter-rouge\">GND</code>, <code class=\"language-plaintext highlighter-rouge\">GND</code>    <ul>      <li>16 pins (outer) compatible with WEMOS/LOLIN D1 mini shields</li>      <li><code class=\"language-plaintext highlighter-rouge\">EN</code> RESET button</li>      <li><code class=\"language-plaintext highlighter-rouge\">GPIO0</code> BOOT button</li>      <li><code class=\"language-plaintext highlighter-rouge\">GPIO15</code> LED (blue status LED)</li>    </ul>  </li>  <li>Compatible with CircuitPython, MicroPython (default firmware), Arduino and ESP-IDF</li></ul><h2 id=\"notes\">Notes</h2><ul>  <li>There is an error on the v1.0.0 board silkscreen. GPIO12/13 should be reversed. Error is fixed without version change since late 2021.</li></ul><h2 id=\"learn-more\">Learn More</h2><ul>  <li><a href=\"https://www.wemos.cc/en/latest/s2/s2_mini.html\">Manufacturer Specifications</a></li>  <li><a href=\"https://www.wemos.cc/en/latest/_static/files/sch_s2_mini_v1.0.0.pdf\">Schematics</a></li>  <li><a href=\"https://www.wemos.cc/en/latest/_static/files/dim_s2_mini_v1.0.0.pdf\">Dimensions</a></li>  <li><a href=\"https://www.wemos.cc/en/latest/tutorials/s2/get_started_with_micropython_s2.html\">Factory MicroPython firmware</a></li></ul><h2 id=\"enter-bootloader\">Enter bootloader</h2><p>To enter UF2 Bootloader Version 0.10.2:</p><ul>  <li>Click reset button</li>  <li>Wait until LED is lit</li>  <li>Hold BOOT button</li></ul><p>Be sure not to hold BOOT button when RESET button is pressed.</p><h2 id=\"purchase\">Purchase</h2><ul>  <li><a href=\"https://www.aliexpress.com/item/1005003145192016.html\">AliExpress</a></li></ul>"
+        "description": "<p>The LOLIN S2 Mini is a small (33.4 mm x 25.4 mm) development board. The form factor is almost the same as the well-known LOLIN D1 mini. This means that there is a high chance that the <a href=\"https://www.wemos.cc/en/latest/d1_mini_shield/index.html\">D1 Mini Shields</a> could also be uses with this board.</p><h2 id=\"technical-details\">Technical details</h2><ul>  <li>ESP32-S2FN4R2 WiFi SoC    <ul>      <li>Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz</li>      <li>Integrated 802.11 b/g/n WiFi 2.4 GHz Transceiver, up to 150 Mbps</li>      <li>Integrated RISC-V ULP Coprocessor</li>      <li>Integrated Temperature Sensor (-20 °C to 110 °C)</li>      <li>Operating Voltage: 3.0 to 3.6 V        <ul>          <li>WiFi: 310 mA (peak)</li>          <li>Modem-sleep: 12-19 mA</li>          <li>Light-Sleep: 450 µA</li>          <li>Deep-Sleep: 20-190 µA</li>        </ul>      </li>      <li>320 KB SRAM</li>      <li>4 MB Flash (embedded)</li>      <li>2 MB PSRAM (embedded)</li>      <li>16 KB SRAM in RTC (accessable by main CPU, 8 KB accessable by ULP coprocessor)</li>      <li>4 Kbit eFuse (1792 bits reserved for user data)</li>      <li>2 13-bit SAR ADCs, up to 20 channels (2 channels not available on ADC2 due to USB D+/D-)        <ul>          <li>2 8-bit DAC</li>          <li>14 touch sensing IOs</li>          <li>4 SPI (2 usable due to embedded flash &amp; PSRAM)</li>          <li>1 I2S</li>          <li>2 I2C</li>          <li>2 UART</li>          <li>1 DVP 8/16 camera interface, implemented using the hardware resources of I2S</li>          <li>1 LCD interface (8-bit serial RGB/8080/6800), implemented using the hardware resources of SPI2</li>          <li>1 LCD interface (8/16/24-bit parallel), implemented using the hardware resources of I2S</li>          <li>1 TWAI® controller compatible with ISO 11898-1 (CAN Specification 2.0)</li>          <li>LED PWM controller, up to 8 channels</li>          <li>USB OTG 1.1 controller and PHY, with host and device support</li>          <li>Cryptographic Hardware Accelerators: AES, ECB/CBC/OFB/CFB/CTR, GCM, SHA, RSA, ECC (Digital Signature)</li>        </ul>      </li>    </ul>  </li>  <li>USB-C connector, for built-in ROM USB bootloader, serial port debugging, and USB device mode</li>  <li>3.3 V regulator ME6211C33    <ul>      <li>Maximum Output Current: 500 mA （V<sub>IN</sub>＝4.3 V, V<sub>OUT</sub>＝3.3 V）</li>      <li>Dropout Voltage: 100 mV@ I<sub>OUT</sub>＝100 mA</li>      <li>Operating Voltage Range: 2V～6.0V</li>      <li>Low Power Consumption: 40 µA （typ.）</li>      <li>Standby Current: 0.1 µA （typ.）</li>    </ul>  </li>  <li>27 GPIO pins, plus <code class=\"language-plaintext highlighter-rouge\">EN</code>, <code class=\"language-plaintext highlighter-rouge\">VBUS</code>, <code class=\"language-plaintext highlighter-rouge\">3V3</code>, <code class=\"language-plaintext highlighter-rouge\">GND</code>, <code class=\"language-plaintext highlighter-rouge\">GND</code>    <ul>      <li>16 pins (outer) compatible with WEMOS/LOLIN D1 mini shields</li>      <li><code class=\"language-plaintext highlighter-rouge\">EN</code> RESET button</li>      <li><code class=\"language-plaintext highlighter-rouge\">GPIO0</code> BOOT button</li>      <li><code class=\"language-plaintext highlighter-rouge\">GPIO15</code> LED (blue status LED)</li>    </ul>  </li>  <li>Compatible with CircuitPython, MicroPython (default firmware), Arduino and ESP-IDF</li></ul><h2 id=\"notes\">Notes</h2><ul>  <li>    <p>There is an error on the v1.0.0 board silkscreen. GPIO12/13 should be reversed. Error is fixed without version change since late 2021.</p>  </li>  <li>    <p>There are no labeled SPI or I2C pins on the silkscreen. The following pins are configured by CircuitPython:</p>    <ul>      <li>SCL - GPIO35</li>      <li>SDA - GPIO33</li>      <li>SCK - GPIO7</li>      <li>MOSI - GPIO11</li>      <li>MISO - GPIO9</li>    </ul>  </li></ul><h2 id=\"learn-more\">Learn More</h2><ul>  <li><a href=\"https://www.wemos.cc/en/latest/s2/s2_mini.html\">Manufacturer Specifications</a></li>  <li><a href=\"https://www.wemos.cc/en/latest/_static/files/sch_s2_mini_v1.0.0.pdf\">Schematics</a></li>  <li><a href=\"https://www.wemos.cc/en/latest/_static/files/dim_s2_mini_v1.0.0.pdf\">Dimensions</a></li>  <li><a href=\"https://www.wemos.cc/en/latest/tutorials/s2/get_started_with_micropython_s2.html\">Factory MicroPython firmware</a></li></ul><h2 id=\"enter-bootloader\">Enter bootloader</h2><p>To enter UF2 Bootloader Version 0.10.2:</p><ul>  <li>Click reset button</li>  <li>Wait until LED is lit</li>  <li>Hold BOOT button</li></ul><p>Be sure not to hold BOOT button when RESET button is pressed.</p><h2 id=\"purchase\">Purchase</h2><ul>  <li><a href=\"https://www.aliexpress.com/item/1005003145192016.html\">AliExpress</a></li></ul>"
     },
     {
         "board_id": "lolin_s2_pico",

board/lolin_s2_mini/index.html

@@ -210,7 +210,19 @@ <h2 id="technical-details">Technical details</h2>
 <h2 id="notes">Notes</h2>
 
 <ul>
-  <li>There is an error on the v1.0.0 board silkscreen. GPIO12/13 should be reversed. Error is fixed without version change since late 2021.</li>
+  <li>
+    <p>There is an error on the v1.0.0 board silkscreen. GPIO12/13 should be reversed. Error is fixed without version change since late 2021.</p>
+  </li>
+  <li>
+    <p>There are no labeled SPI or I2C pins on the silkscreen. The following pins are configured by CircuitPython:</p>
+    <ul>
+      <li>SCL - GPIO35</li>
+      <li>SDA - GPIO33</li>
+      <li>SCK - GPIO7</li>
+      <li>MOSI - GPIO11</li>
+      <li>MISO - GPIO9</li>
+    </ul>
+  </li>
 </ul>
 
 <h2 id="learn-more">Learn More</h2>

feed.rss

@@ -4,7 +4,7 @@
     <title>CircuitPython.org Boards</title>
 <link>https://circuitpython.org/</link>
 <description>A list of CircuitPython and Blinka supported boards</description>
-<lastBuildDate>Fri, 25 Oct 2024 13:38:43 -0400</lastBuildDate>
+<lastBuildDate>Fri, 25 Oct 2024 13:39:16 -0400</lastBuildDate>
 
 <item>
     <title>PicoADK v2 - Audio Development Kit</title>
@@ -17007,7 +17007,19 @@ status LED operation.</p>
 <h2 id="notes">Notes</h2>
 
 <ul>
-  <li>There is an error on the v1.0.0 board silkscreen. GPIO12/13 should be reversed. Error is fixed without version change since late 2021.</li>
+  <li>
+    <p>There is an error on the v1.0.0 board silkscreen. GPIO12/13 should be reversed. Error is fixed without version change since late 2021.</p>
+  </li>
+  <li>
+    <p>There are no labeled SPI or I2C pins on the silkscreen. The following pins are configured by CircuitPython:</p>
+    <ul>
+      <li>SCL - GPIO35</li>
+      <li>SDA - GPIO33</li>
+      <li>SCK - GPIO7</li>
+      <li>MOSI - GPIO11</li>
+      <li>MISO - GPIO9</li>
+    </ul>
+  </li>
 </ul>
 
 <h2 id="learn-more">Learn More</h2>