| Board | INPUT Pin Zero Cross |
OUTPUT Pin | ||
| Leonardo | D7 (NOT CHANGABLE) | D0-D6, D8-D13 | ||
| Mega | D2 (NOT CHANGABLE) | D0-D1, D3-D70 | ||
| UNO NANO |
D2 (NOT CHANGABLE) | D0-D1, D3-D20 | ||
| ESP8266 |
|
|
|
|
| ESP32 |
|
|
|
|
| Arduino M0 Arduino Zero |
D7 (NOT CHANGABLE) | D0-D6, D8-D13 | ||
| Arduino Due | D0-D53 | D0-D53 | ||
| STM32 Black Pill Blue Pill Etc... |
PA0-PA15, PB0-PB15
PC13-PC15 |
PA0-PA15, PB0-PB15
PC13-PC15 |
||
This library can simplify user code with following functions:
1. Function dimmerLamp - this function initializes the number of operating pin and is defined by the user
Example:
a.dimmerLamp dimmer(4); dimmer output DIM/PSM is initialized on the pin 4 for the bords WITHOUT changable ZERO-CROSS input pin (AVR, Arduino M0/Zero)
b.dimmerLamp dimmer(4, 2); dimmer output DIM/PSM is initialized on the pin 4 and zero-cross initialized on pin 2. Only for boards whith changable zero-cross(ESP32, ESP8266, Arduino Due)
2. Function begin port initialization, timer and external interrupt from zero-cross.
Example:
dimmer.begin(NORMAL_MODE, ON/OFF); port initialization, work mode choice, ON/OFF.
Parameter 1: dimmer working modes consist of two choices - NORMAL_MODE and TOGGLE_MODE
a. NORMAL_MODE to make dimmer work in defined value from 0 to 100 (%) (integer)
Example of this mode located in \RBDdimmer\examples\SimpleDimmer
b. TOGGLE_MODE smooth change of dimming value up or down in a defined range. This solutions implies change of dimming values by means of hardware timer, without using the cycle code.
Example of this mode located in \RBDdimmer\examples\SimpleToggleDimmer
Parameter 2: ON/OFF.
a. ON - turns timer ON, allows to use dimmer.
b. OFF - turns timer parameters OFF, prevents the use of dimmer.
3. Function setPower sets dimming value from 0 to 100%
Example: dimmer.setPower(90);
4. Function getPower to display current dimming value
Example: Serial.print(dimmer.getPower()); Result 0~100 int
5. Function setMode sets and changes the work mode (NORMAL_MODE and TOGGLE_MODE)
dimmer.setMode(NORMAL_MODE/TOGGLE_MODE)
6. Function getMode displays values of current work mode
Example: Serial.print(dimmer.getPower()); Result 0 (NORMAL_MODE) or 1 (TOGGLE_MODE)
7. Function setState sets dimming state ON/OFF
Example: dimmer.setState(ON); delay(100); dimmer.setState(OFF);
8. Function getState displays current state of dimmer
Serial.print(dimmer.getState()); Result 0 (OFF) or 1 (ON)
9. Function changeState changes dimmer state to the opposite one
Пример dimmer.setState(ON); delay(100); dimmer.changeState; delay(100);
10. Function toggleSettings smooth change of dimming value up or down in a defined range
Example located in \RBDdimmer\examples\SimpleToggleDimmer
