✨ PELTIER_BED (2)

MarlinFirmware · Oct 13, 2024 · 566d915 · 566d915
1 parent bbfbae3
commit 566d915
Show file tree

Hide file tree

Showing 376 changed files with 379 additions and 379 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
@@ -208,7 +208,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif

diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h
@@ -203,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
- #if ENABLED(BED_LIMIT_SWITCHING)
+ #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
  #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif