Skip to content

Memento to create Samba servers on Linux systems !

License

Notifications You must be signed in to change notification settings

LinuxLab-ESGI/Samba-Memento

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 

Repository files navigation

Samba-Memento

Memento to create Samba servers on Linux systems !


Prerequisite :

You can install Samba via these commands :

For Debian distributions :

apt install samba -y

For RedHat ones :

dnf install samba -y

Of course, your equipment must be connected on a LAN and preferably with a static address.

In fact, it will be easier to use and configure the Samba server if the equipment has a static address not provided by a DHCP server.

I - Create a Samba server

Once the Samba server is installed, create the directory where you want users have to access. With the mkdir command create the directory. As an example, we will use /home/pi/shared/public.

Then, edit the configuration file /etc/samba/smb.conf and add the following lines :

[MyAwesomeSambaServer]
path = /home/pi/shared/public
writeable=Yes
create mask=0777
directory mask=0777
public=no

Key Description
[MyAwesomeSambaServer] Name of your Samba configuration, you can freely choose it. Moreover, it defines the point at which you will access the share. For example, ours will be at the following address: \\raspberrypi\MyAwesomeSambaServer.
path Directory of the folder we created before.
writeable When this option is set to “Yes“, it will allow the folder to be writable.
create mask This option defines the maximum permissions for files.
directory mask This option defines the maximum permissions for folders.
public If this is set to “no” the Samba server will require a valid user to grant access to the shared folder. I beg you to set the "no" value !

Finally, restart the Samba server to load the new configuration :

sudo systemctl restart smbd

II - Authentication to the Samba server

To add a minimum of security, we will create a user with a password to prevent not authorized access to our Samba server. First, enter the command :

sudo smbpasswd -a <name_of_the_user>

Then, enter the password of the user.

III - Access to the Samba server

To access to your Samba server, you will need to get the name of your Samba configuration (in this example : MyAwesomeSambaServer) and the NetBios name or the IP address of the server. This access depends of the operating system.

On Windows :

Follow this tutorial : https://www.techradar.com/how-to/how-to-map-a-network-drive-in-windows-10

On Mac OS :

Follow this tutorial : https://www.riohondo.edu/its/how-to-connect-to-a-network-shared-folder-with-mac-os-x/

On Linux :

Follow this tutorial : https://www.ghacks.net/2009/11/04/connect-to-your-samba-server-from-linux/


Updated : 17/06/2024, Author : Xen0rInspire

Releases

No releases published

Packages

No packages published