Skip to content

v4.2.0
Compare
Choose a tag to compare
@Frix-x Frix-x released this 17 Nov 21:13
· 107 commits to main since this release
v4.2.0
e32e9fc
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

Klippain v4.2.0

Special Highlight: Shake&Tune Module 🚀

We're excited to introduce the Shake&Tune module in Klippain, a significant evolution from the original IS workflow scripts. This module represents a major step forward in our commitment to enhancing the Klippain experience and printer tuning with:

  • 🎨 Stunning visual overhaul tailored for comprehensive analysis, making it easier than ever to understand your printer's dynamics and frequency profiles. There is now also an automatic peak detection algorithm, custom advices based on the graphs, printer's mechanical health indicator, damping ratio estimation, etc...
  • 🔧 Hassle-free setup as everything is integrated in Klippain for all of you if you've set an accelerometer. Just run the macro and look at the results as you were doing with the old IS workflow. The good news is that this module is also now available outside Klippain to use it in another Klipper configuration easily here.
  • 📊 And an enhanced input shaping documentation is also available directly in the K-Shake&Tune module documentation. We've added numerous elements to guide you in interpreting the graphs, making it easier to optimize your printer’s performance.

Fixes and Improvements

Configuration and Templates:

  • Fixed a typo in SKR Pico template on motor pin definition
  • Added a prefilled template for a custom MCU configurations, facilitating the initial installation of Klippain with an MCU not yet officially supported
  • Added a template for the Fysetc Spider 3
  • Added a template for the BTT EBB SB2209 CAN v1.0 with the RP2040 chip
  • Rampon ADXLs support was added for easy input shaping setting since this is now a pretty common type of ADXL probe
  • Support for the ADXL345 SHT V2.x integrated sensor added
  • Support for the portable input shaper from Fysetc (RP2040 based ADXL) added
  • Added support for servo in SKR Mini E3 MCU to align this template with the other templates
  • Added configuration for BTT Manta M8P V2, expanding board support with newer products
  • Added support for Galileo2 Z blocks and Galileo2 Extruder that are both very good products!
  • Added a template for the Creality printers bed due to a different sensor than the one used on Keenovo heaters. This is done by a small refactoring of the bed templates files but the old one is still valid, so it's not a breaking change for now but this file will likely be deprecated in the future
  • Added config files for 180mm printers such as the Micron+ for example

Filament Sensors:

  • Removed invalid option extruder in filament switch sensor config file (#294)
  • Flush Klipper buffer before resetting filament sensor to ensure accurate readings and no remaining filament movements before reactivating the sensor after a purge or something like that

General macros and scripts changes:

  • Reworked input shaper scripts for enhanced performance and usability (K-Shake&Tune module)
  • Added support for Extruder motion vibrations measurements (K-Shake&Tune module)
  • Reset filter macro at the beginning of the START_PRINT sequence to avoid a delayed filter stop caused by a previsously finished print
  • Refactored plot_graph.sh into a Python script for better performance and flexibility. This also allow to solve the path problem when the user was not "Pi". If you've made an override about this, be sure to remove it!
  • Solved an old issue with conditional checks for QGL/Z_TILT (#214). Now the tilting process should really be conditionnal as it was originally designed when setting variable_force_homing_in_start_print to false!
  • Corrected a small typo in variable configuration for variable_filter_default_time_on_end_print
  • Enhanced M109 and M190 logic with improved temperature settling (#302) in order to avoid a bug when going from an high temperature to a lower one when the variable_fix_heaters_temperature_settle was set to true
  • Improved the bed heatsoak sequence to use the current bed temperature (instead of bed temperature target) for a more accurate real time reading

System and Installation:

  • Added an auto uninstall script, simplifying the removal process for users that want to go back to their old configuration or that installed Klippain by mistake. This also allow at the same time to try Klippain very easily without taking too much risks
  • Made tweaks to the installation script and updated .gitignore for better setup experience.
  • Fixed issue with the path set in the gcode_shell_command for system_info.py script resolving startup errors when the user was not "Pi". If you've made an override about this, be sure to remove it!

LED and Status Indicators:

  • Fixed status LEDs for separate nozzle and logo LEDs, ensuring correct operation when having multiple Neopixel chains
  • Prevented occasional LED flashing that could occurs before homing in the START_PRINT sequence

Miscellaneous:

  • Moved (and improved) the input shaper analysis documentation directly in the K-Shake&Tune module repository documentation. The old markdown docs now point to the new one to avoid problems and keep an easy access to them
  • Enhanced START_PRINT sequence to allow a bed mesh profile loading from slicers using the MESH=xxxxx parameter in the custom START_PRINT Gcode. When using this, the adaptive bed mesh will be canceled and the specified mesh profile loaded instead. This can be usefull for calibration prints or if you just want to get the same static mesh for every prints.
  • Passed all the START_PRINT raw parameters in the _MODULE_CUSTOM1/3 in case you want to do something fancy in them based on your slicer parameters. Feel free to use them as you like :)

New Contributors

Full Changelog: v4.1.1...v4.2.0

Contributors

blutack, kdomanski, and 5 other contributors
Assets 2
Loading