Releasing v24.2

Makefile

@@ -45,7 +45,7 @@ TRUSTED_HOST  = pyats-pypi.cisco.com
 
 # Development pkg requirements
 RELATED_PKGS = genie.libs.parser
-DEPENDENCIES = xmltodict requests
+DEPENDENCIES = xmltodict requests "netaddr<1.0.0"
 
 ifeq ($(MAKECMDGOALS), devnet)
 	BUILD_CMD += --devnet

changelog/2024/february.rst

@@ -0,0 +1,137 @@
+--------------------------------------------------------------------------------
+                                      Fix                                       
+--------------------------------------------------------------------------------
+
+* iosxe
+    * c9300
+        * Remove unused imports
+    * Modified ShowPlatformSoftwareFedSwitchActiveAclStatisticsEventsSchema
+        * Modified schema by added mac_ingress_acl_deny , mac_egress_acl_deny
+    * Modified ShowIdpromTan Parser
+        * Modified the revision_num from int to str, Since revision number is consists alphanumeric.
+    * Modified ShowIpIgmpSnoopingQuerierVlanDetailSchema
+        * added vlan_id in def cil command
+    * Fix for ShowPlatformTcamUtilization
+        * Modified script by adding the command "show platform hardware fed switch {mode} fwd-asic resource tcam utilization".
+    * Modified ShowPlatformSoftwareFedSwitchActiveStpVlan Parser
+        * Modified the p2 regex pattern.
+    * Modified ShowPlatformSoftwareFedSwitchActiveMonitor Parser
+        * added support for switch number
+    * Modified parser ShowPlatformTcamPbr
+        * Fixed schema and regex pattern
+    * Modified ShowEthernetCfmMaintenancePointsRemoteDetail
+        * Changed flat output working only for single instance to multiple instance support
+            * Add index for multile remote points
+            * Add key for total_remote_meps, total_mep_port_up, total_mep_intf_up
+        * Updated regex pattern p5(ma_name) p7(evc) to accommodate various outputs.
+    * Modified ShowIpArpInspectionVlan
+        * Updated regex pattern <p5> to accommodate various outputs.
+    * C9500
+        * Modified ShowPlatformTcamUtilization
+            * Changed schema to accomodate various outputs.
+            * Added regex pattern <p2> and <p3> to accommodate various outputs.
+    * Added ShowFipsStatus
+        * show fips status
+    * Modified ShowPlatformHardwareAuthenticationStatus
+        * Modified optional keys to support SVL and Stack setups
+    * Modified ShowCtsInterfaceSchema
+        * Changed global_dot1x_feature from schema to Optional (not present on port-channel interfaces)
+        * Changed cts mode value from schema to Optional to (not present when cts status is disabled)
+    * Modified ShowCtsInterface
+        * Updated regex pattern p2 to also match Port-channel interfaces
+        * Updated regex pattern p3 to also match CTS disabled status
+        * Added conditional to cts_dict so mode key is not generated if cts is disabled
+    * Modified golden_output2_expected test data
+        * Added expected output for Port-channel interfaces
+    * Added golden_output4 test data & expected results
+    * Modified show_policy_map
+        * Added priority_percent to the schema.
+        * Added regex p10_2 to accommodate getting the data from the output.
+
+* utils
+    * Updated unittest.py to use exec_module() instead of load_module()
+
+* nxos
+    * Modified ShowIpInterfaceVrfAll Parser
+        * Modified pattern <p2> to parse line 'lo2, Interface status protocol-up/link-up/admin-up, iod 7, mode anycast-mac,external'
+        * Added key 'mode' as optional parameter to schema
+        * Modified keys 'counters', 'ip_mtu', 'proxy_arp', 'local_proxy_arp', 'multicast_routing', 'icmp_redirects', 'directed_broadcast' as optional parameters in schema
+        * Modified keys 'icmp_unreachable', 'icmp_port_unreachable', 'unicast_reverse_path', 'load_sharing', 'int_stat_last_reset' as optional parameters in schema
+    * Modified ShowCdpNeighbors
+        * Updated regex pattern <p1> to accommodate various outputs.
+    * Modified ShowModule
+        * Updated regex pattern <p3> to make status optional
+        * Added new regex pattern <p7> to capture status separately
+    * Modified ShowModule
+        * Updated regex pattern <p1> to accommodate `N9K-vSUP` model.
+
+* iosxr
+    * Modified ShowBgpVrfAfPrefix
+        * Added support for cli 'show bgp {address_family} rd {route_rd} detail'
+        * Added support for cli 'show bgp {address_family} {route} detail'
+    * Modified ShowPtpPlatformServo
+        * Modified pattern <p15> to support line 'setTime()0  stepTime()0 adjustFreq()0'
+        * Modified pattern <p16> to support line 'Last setTime 0.000000000 flag0  Last stepTime0 Last adjustFreq0'
+        * Modified key 'adjust_freq_time' as optional parameter in schema
+
+* generic
+    * Update show version
+        * Update show version for checking if device is in controller mode.
+
+
+--------------------------------------------------------------------------------
+                                      New                                       
+--------------------------------------------------------------------------------
+
+* iosxr
+    * Added ShowMplsForwardingPrefixIPV4Unicast
+        * parser for 'show mpls forwarding prefix ipv4 unicast {prefix}'
+    * Added ShowOspfv3DatabaseprefixAdvRouter
+        * Added schema and parser for show ospfv3 database prefix advertising router
+    * Modified ShowBgpAddressfamilyPrefix Parser
+        * parser for 'show bgp {address_family} {bgp_prefix}'
+    * Added ShowFilesystemLocationAll
+        * Added schema and parser for cli 'show filesystem location all'
+    * Added ShowRouteSummary
+        * added new parser for cli 'show route summary'
+
+* iosxe
+    * Added ShowMplsTrafficEngFastRerouteDatabaseDetail
+        * Added schema and parser for show mpls traffic-eng fast-reroute database detail
+    * Added ShowIpRsvpFast
+        * Added schema and parser for show ip rsvp fast
+    * Added ShowIsisIpv6MicroloopAvoidance
+        * Added parser for show isis ipv6 microloop avoidance and schema
+    * Added ShowIsisIpv6RibParser
+        * Updated pattern to capture lfa_type to include 'TILFA node-protecting'.
+        * Fixed issues with 'show isis ipv6 rib' command to handle single flag ouput cases.
+    * Added ShowL2tpSessionPackets
+        * show l2tp session packets
+        * show l2tp session packets vcid {vcid}
+    * Added ShowTelemetryInternalProtocolManager
+        * parser for 'show telemetry interal protocol {protocol} manager'
+    * Added ShowIpDhcpSnoopingBibdingInterfaceCount
+        * parser for ShowIpDhcpSnoopingBibdingInterfaceCount
+    * Added ShowIpVerifySourceInterfaceCount
+        * parser for ShowIpVerifySourceInterfaceCount
+    * Added ShowPortSecurityInterfaceCount
+        * parser for ShowPortSecurityInterfaceCount
+    * Added ShowDeviceTrackingDatabaseInterfaceCount
+        * parser for ShowDeviceTrackingDatabaseInterfaceCount
+    * Added ShowHwModuleSecurityLockStatus
+        * show hw-module {filesytem} security-lock status
+    * Added ShowPlatformSoftwareMemoryDatabaseFedSwitchActiveCallsite Parser.
+    * Added ShowDiagnosticStatus Parser.
+    * Added ShowPlatformSoftwareFedSwitchActivePuntBrief Parser.
+
+* nxos
+    * Added ShowBfdIpv4Session
+        * show bfd ipv4 neighbors
+        * show bfd ipv4 neighbors vrf {vrf}
+        * show bfd ipv4 {ipv4_address} neighbors vrf {vrf}
+    * Added ShowBfdIpv6Session
+        * show bfd ipv6 neighbors
+        * show bfd ipv6 neighbors vrf {vrf}
+        * show bfd ipv6 {ipv6_address} neighbors vrf {vrf}
+
+