Skip to content

Releases: Atmosphere-NX/Atmosphere

Atmosphère 1.8.0

16 Oct 05:07
Compare
Choose a tag to compare
Atmosphère 1.8.0 Pre-release
Pre-release

1.8.0 is Atmosphère's eightieth official release.

Please be sure to update fusee when upgrading to 1.8.0. fusee-primary no longer exists, and will not work any more.

Please note: Atmosphère 1.8.0 is currently in pre-release, and issues may be found that need to be fixed before full release.

  • If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
  • 1.8.0 will transition to release after a short amount of time has passed without pressing bug reports.

With thanks to the @switchbrew team, Atmosphère 1.8.0 is bundled with hbl 2.4.4, and hbmenu 3.6.0.

The following was changed since the last release:

  • Basic support was added for 19.0.0.
    • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
      • There shouldn't be anything user visible resulting from this, but it will be addressed in a future atmosphère update. There is still one action item from 18.0.0 to be addressed, as well.
    • exosphère was updated to reflect the latest official secure monitor behavior.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • loader was updated to reflect the latest official behavior.
    • pm was updated to reflect the latest official behavior.
    • ro was updated to reflect the latest official behavior.
  • creport's file acces patterns were optimized, greatly improving performance when generating a crash report.
  • Atmosphère now uses relr relocations where possible.
    • This reduces the filesize of a number of atmosphère's modules.
  • A number of minor issues were fixed and improvements were made, including:
    • Support was fixed for running Atmosphère on newer units with specific Hynix/Micron DRAM chips.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.8, please see the official release notes.

Atmosphère 1.7.1

11 Jun 05:26
Compare
Choose a tag to compare

1.7.1 is Atmosphère's seventy-ninth official release.

Please be sure to update fusee when upgrading to 1.7.1. fusee-primary no longer exists, and will not work any more.

Note: fusee.bin was updated on 2024/06/11 at 10:30 AM PDT to fix a failure to apply nogc patches on 18.1.0. The updated fusee hash a sha256 hash prefix of 6c0445649c...

With thanks to the @switchbrew team, Atmosphère 1.7.1 is bundled with hbl 2.4.4, and hbmenu 3.6.0.

The following was changed since the last release:

  • Support was added for 18.1.0.
  • Atmosphère was updated to use GCC 14/newlib (latest devkitA64/devkitARM releases).
  • Further changes were for 18.0.0:
    • loader was updated to reflect the latest official behavior.
  • General system stability improvements to enhance the user's experience.

And the following was changed in 1.7.0:

  • Basic support was added for 18.0.0.
    • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
      • There shouldn't be anything user visible resulting from this, but it will be addressed in a future atmosphère update, once I am not traveling so much.
    • exosphère was updated to reflect the latest official secure monitor behavior.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • spl was updated to reflect the latest official behavior.
  • fusee no longer supports applying IPS patches to KIPs.
    • The only KIPs that are ever present are a) atmosphère modules, b) custom system modules, or c) FS.
    • The IPS subsystem was originally designed to make nogc patches work for FS, but these are now internal, and it appears the literal only kip patches that exist are for piracy.
      • I could not find any kip patches posted anywhere made for any other purpose.
    • It fundamentally does not make sense to slow down boot for every normal user for a feature that has no actual use-case, especially when fusee seeks to be a minimal bootloader.
  • Minor improvements were made to atmosphere's gdbstub, including:
    • Support was added for QStartNoAckMode.
    • An issue was fixed that could cause a fatal error when creating too many breakpoints.
  • A number of minor issues were fixed and improvements were made, including:
    • pt-BR (PortugueseBr) is now accepted as a valid language when overriding game locales.
    • A bug was fixed that could cause atmosphere to incorrectly serialize output object IDs over IPC when using domain objects.
    • A bug was fixed in pm's resource limit boost logic that could potentially cause legitimate boosts to fail in certain circumstances.
    • loader/ro will now throw a fatal error when using invalid IPS patches that go out of bounds, instead of corrupting memory.
    • Support was fixed for booting using a memory configuration of half of the true available memory (e.g. forcing a 4GB configuration on an 8GB board).
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.7, please see the official release notes.

Atmosphère 1.7.0

29 Mar 15:42
Compare
Choose a tag to compare

1.7.0 is Atmosphère's seventy-eighth official release.

Please be sure to update fusee when upgrading to 1.7.0. fusee-primary no longer exists, and will not work any more.

With thanks to the @switchbrew team, Atmosphère 1.7.0 is bundled with hbl 2.4.4, and hbmenu 3.6.0.

The following was changed since the last release:

  • Basic support was added for 18.0.0.
    • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
      • There shouldn't be anything user visible resulting from this, but it will be addressed in a future atmosphère update, once I am not traveling so much.
    • exosphère was updated to reflect the latest official secure monitor behavior.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • spl was updated to reflect the latest official behavior.
  • fusee no longer supports applying IPS patches to KIPs.
    • The only KIPs that are ever present are a) atmosphère modules, b) custom system modules, or c) FS.
    • The IPS subsystem was originally designed to make nogc patches work for FS, but these are now internal, and it appears the literal only kip patches that exist are for piracy.
      • I could not find any kip patches posted anywhere made for any other purpose.
    • It fundamentally does not make sense to slow down boot for every normal user for a feature that has no actual use-case, especially when fusee seeks to be a minimal bootloader.
  • Minor improvements were made to atmosphere's gdbstub, including:
    • Support was added for QStartNoAckMode.
    • An issue was fixed that could cause a fatal error when creating too many breakpoints.
  • A number of minor issues were fixed and improvements were made, including:
    • pt-BR (PortugueseBr) is now accepted as a valid language when overriding game locales.
    • A bug was fixed that could cause atmosphere to incorrectly serialize output object IDs over IPC when using domain objects.
    • A bug was fixed in pm's resource limit boost logic that could potentially cause legitimate boosts to fail in certain circumstances.
    • loader/ro will now throw a fatal error when using invalid IPS patches that go out of bounds, instead of corrupting memory.
    • Support was fixed for booting using a memory configuration of half of the true available memory (e.g. forcing a 4GB configuration on an 8GB board).
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.7, please see the official release notes.

Atmosphère 1.6.2

27 Oct 23:47
Compare
Choose a tag to compare

1.6.2 is Atmosphère's seventy-seventh official release.

Please be sure to update fusee when upgrading to 1.6.2. fusee-primary no longer exists, and will not work any more.

With thanks to the @switchbrew team, Atmosphère 1.6.2 is bundled with hbl 2.4.4, and hbmenu 3.6.0.

The following was changed since the last release:

  • Support was finished for 17.0.0.
    • erpt was updated to support the latest official behavior.
    • jpegdec was updated to support the latest official behavior.
    • pm was updated to support the latest official behavior.
  • General system stability improvements to enhance the user's experience.

And the following was changed in 1.6.1:

  • An improved solution to the problem that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0 was added.
    • In particular, booting atmosphère will now automatically detect the problem and unbrick any consoles which have fallen into this state.
  • Some improvements were made to haze, including:
    • Performance was greatly improved:
      • Support was added for GetObjectPropList, which decreases the amount of requests made by ~8x.
      • Haze now performs rendering on the GPU, freeing up the CPU to respond to requests in a more timely manner.
    • An issue was fixed with how haze configures bMaxPacketSize0 which improves support for USB3.
  • General system stability improvements to enhance the user's experience.

And the following was changed in 1.6.0:

  • Basic support was added for 17.0.0.
    • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
      • There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosphère update.
    • exosphère was updated to reflect the latest official secure monitor behavior.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • ncm was updated to reflect the latest official behavior.
    • erpt was partially updated to support the latest official behavior.
  • Atmosphere's gdbstub now supports waiting to attach to a specific program id on launch (as opposed to any application).
    • The monitor command for this is monitor wait <hex program id>, where program id can optionally have an 0x prefix.
  • Support was added to haze for editing files in-place and performing 64-bit transfers (files larger than 4 GB).
  • bpc.mitm was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
    • This should cause the console to no longer wake ~15 seconds after shutdown on Mariko.
  • A number of minor issues were fixed and improvements were made, including:
    • A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.6, please see the official release notes.

Atmosphère 1.6.1

16 Oct 19:38
Compare
Choose a tag to compare
Atmosphère 1.6.1 Pre-release
Pre-release

1.6.1 is Atmosphère's seventy-sixth official release.

Please be sure to update fusee when upgrading to 1.6.1. fusee-primary no longer exists, and will not work any more.

Note: switch/haze.nro was updated in the release zip on 2023/10/16 at 3:40 PM PDT to fix an issue where haze could fail to work on Windows. The updated zip has a build hash of "7f4450f93".

Please note: Atmosphère 1.6.1 is currently in pre-release, and issues may be found that need to be fixed before full release.

  • If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
  • 1.6.1 will transition to release after a short amount of time has passed without pressing bug reports.

With thanks to the @switchbrew team, Atmosphère 1.6.1 is bundled with hbl 2.4.3, and hbmenu 3.5.1.

The following was changed since the last release:

  • An improved solution to the problem that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0 was added.
    • In particular, booting atmosphère will now automatically detect the problem and unbrick any consoles which have fallen into this state.
  • Some improvements were made to haze, including:
    • Performance was greatly improved:
      • Support was added for GetObjectPropList, which decreases the amount of requests made by ~8x.
      • Haze now performs rendering on the GPU, freeing up the CPU to respond to requests in a more timely manner.
    • An issue was fixed with how haze configures bMaxPacketSize0 which improves support for USB3.
  • General system stability improvements to enhance the user's experience.

And the following was changed in 1.6.0:

  • Basic support was added for 17.0.0.
    • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
      • There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosphère update.
    • exosphère was updated to reflect the latest official secure monitor behavior.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • ncm was updated to reflect the latest official behavior.
    • erpt was partially updated to support the latest official behavior.
  • Atmosphere's gdbstub now supports waiting to attach to a specific program id on launch (as opposed to any application).
    • The monitor command for this is monitor wait <hex program id>, where program id can optionally have an 0x prefix.
  • Support was added to haze for editing files in-place and performing 64-bit transfers (files larger than 4 GB).
  • bpc.mitm was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
    • This should cause the console to no longer wake ~15 seconds after shutdown on Mariko.
  • A number of minor issues were fixed and improvements were made, including:
    • A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.6, please see the official release notes.

Atmosphère 1.6.0

12 Oct 16:39
Compare
Choose a tag to compare
Atmosphère 1.6.0 Pre-release
Pre-release

1.6.0 is Atmosphère's seventy-fifth official release.

Please be sure to update fusee when upgrading to 1.6.0. fusee-primary no longer exists, and will not work any more.

Please note: Atmosphère 1.6.0 is currently in pre-release, and issues may be found that need to be fixed before full release.

  • If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
  • 1.6.0 will transition to release after a short amount of time has passed without pressing bug reports.

With thanks to the @switchbrew team, Atmosphère 1.6.0 is bundled with hbl 2.4.3, and hbmenu 3.5.1.

The following was changed since the last release:

  • Basic support was added for 17.0.0.
    • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
      • There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosphère update.
    • exosphère was updated to reflect the latest official secure monitor behavior.
    • mesosphère was updated to reflect the latest official kernel behavior.
    • ncm was updated to reflect the latest official behavior.
    • erpt was partially updated to support the latest official behavior.
  • Atmosphere's gdbstub now supports waiting to attach to a specific program id on launch (as opposed to any application).
    • The monitor command for this is monitor wait <hex program id>, where program id can optionally have an 0x prefix.
  • Support was added to haze for editing files in-place and performing 64-bit transfers (files larger than 4 GB).
  • bpc.mitm was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
    • This should cause the console to no longer wake ~15 seconds after shutdown on Mariko.
  • A number of minor issues were fixed and improvements were made, including:
    • A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.6, please see the official release notes.

Atmosphère 1.5.5

22 Aug 00:51
Compare
Choose a tag to compare

1.5.5 is Atmosphère's seventy-fourth official release.

Please be sure to update fusee when upgrading to 1.5.5. fusee-primary no longer exists, and will not work any more.

With thanks to the @switchbrew team, Atmosphère 1.5.5 is bundled with hbl 2.4.3, and hbmenu 3.5.1.

The following was changed since the last release:

  • Support was added for 16.1.0.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.5, please see the official release notes.

Atmosphère 1.5.4

14 May 10:27
Compare
Choose a tag to compare

1.5.4 is Atmosphère's seventy-third official release.

Please be sure to update fusee when upgrading to 1.5.4. fusee-primary no longer exists, and will not work any more.

With thanks to the @switchbrew team, Atmosphère 1.5.4 is bundled with hbl 2.4.3, and hbmenu 3.5.1.

The following was changed since the last release:

  • Experimental new functionality was implemented to prevent crashing when building romfs for certain games with obscene file counts.
    • This includes both Fire Emblem: Engage (~190000 files), and The Legend of Zelda: Tears of the Kingdom (~300000) files.
    • The solution involved adding functionality to ams.mitm/pm to dynamically steal memory from the application (and system) pool as needed when the games have romfs mods.
      • No memory is taken, and there is no cost to this functionality when playing without mods (or with overrides disabled).
    • The Legend of Zelda: Tears of the Kingdom is currently the absolute worst case game, requiring ~48 MB of memory to build a romfs image to play with mods.
      • Right now, the memory is sourced as follows: 32 MB (base ams.mitm heap), 10 MB (stolen from application pool), 8 MB (dynamically stolen from system pool).
      • This is 50 MB, which allows a little overhead in the worst case (prevents crashing due to exhausting the heap for other allocations in ams.mitm).
      • Zelda is remarkably sensitive to memory being stolen from the application pool, tolerating no more than 16 MB on 1.0.0 and 12 MB on 1.1.0. I have chosen to steal 10 MB, to be safe, for now.
        • This may break on a future game update, but I will fix it if and when that happens. There is no perfect solution; the game simply requires too much memory to support mods flawlessly, and I am forced to compromise.
    • As usual, if you encounter a game that exhausts ams.mitm's memory (crashing it) when loading layeredfs mods, please contact SciresM#0524.
      • "I am jinxing myself by saying this, but it's really hard to imagine any game being worse than The Legend of Zelda: Tears of the Kingdom, but if it happens again I will drop everything to fix it as usual".
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.5, please see the official release notes.

Atmosphère 1.5.3

09 May 01:50
Compare
Choose a tag to compare

1.5.3 is Atmosphère's seventy-second official release.

Please be sure to update fusee when upgrading to 1.5.3. fusee-primary no longer exists, and will not work any more.

With thanks to the @switchbrew team, Atmosphère 1.5.3 is bundled with hbl 2.4.3, and hbmenu 3.5.1.

The following was changed since the last release:

  • Support was added for 16.0.3.
  • Atmosphère was updated to use GCC 13/newlib 4.3.0 (latest devkitA64/devkitARM releases).
    • Please note: This introduces a known issue, which is currently being worked on.
      • As you may recall from the 1.4.1 changelog, Fire Emblem: Engage requires enormous amounts of memory to support using layeredfs mods with the game.
      • Latest newlib slightly increases malloc overhead size, which makes the previous memory increase insufficient.
      • A general-case solution to this is in the works, which should hopefully fix the problem in a way that doesn't jinx me for the future.
  • A number of minor issues were fixed and improvements were made, including:
    • An issue was fixed that caused system font replacement to not work on 16.0.0+.
    • An minor accuracy issue was addressed in mesosphere's management of certain memory ranges; this issue would have had zero visible impact to the end-user.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.5, please see the official release notes.

Atmosphère 1.5.2

18 Apr 03:51
Compare
Choose a tag to compare

1.5.2 is Atmosphère's seventy-first official release.

Please be sure to update fusee when upgrading to 1.5.2. fusee-primary no longer exists, and will not work any more.

Note: switch/haze.nro was updated in the release zip on 2023/04/18 at 10:15 PM PDT to fix an issue where haze would create files on the device 12 bytes larger than they should be. The updated zip has "-fix1" in its name.

With thanks to the @switchbrew team, Atmosphère 1.5.2 is bundled with hbl 2.4.3, and hbmenu 3.5.1.

The following was changed since the last release:

  • A homebrew application (haze) was added for performing USB file transfer (with thanks to @liamwhite for both design and implementation).
    • haze is included with atmosphère, and provides access to the SD card via the PTP/MTP protocol.
      • Please note: haze will show inside the homebrew menu under the name "USB File Transfer".
    • Please note: Atmosphère cannot be updated at runtime, and trying to install an atmosphère update via haze will fail as usual.
  • General system stability improvements to enhance the user's experience.

For information on the featureset supported by 1.5, please see the official release notes.