Replies: 8 comments 16 replies
-
Hi
|
Beta Was this translation helpful? Give feedback.
-
Hallo Wolfgang, wie Ricardo schon schreibt, deine Konfiguration zu sehen wäre hilfreich. Als Gedanke, für deinen Anwendungsfall bietet sich das "Split-Digipeaten" an, d.h der Digi am Berg empfängt auf der .775, sendet auf der .900 zu deinem iGate. Dein iGate muss dann auf der .900 empfangen und schickt das Paket zu aprsis. 73 |
Beta Was this translation helpful? Give feedback.
-
hi @dm2ov , as @Mane76 told before, the igateConfigurationBackup.json file looks good! its nice you have 7 as power selected as you (maybe) dont need to reach that far with it. now I need some info from you:
2)DM2OV-15 is being sending his gps beacons without any problem. So I need for you to explain as how you "don't see it" or is it that you dont see any repeated packet by it? You can check on received packets on your iGate to see if they appear there |
Beta Was this translation helpful? Give feedback.
-
Hallo Wolfgang, ein paar Worte zum Digi und zu dem was Ricardo meint. Ich glaube ich kenne den Grund deines Problems. Der Digi kann auf zwei Arten betrieben werden, 1) RX und TX auf derselben Frequenz oder 2) RX und TX mit Offset. Laut der Config steht dein Digipeater auf 1). Wenn ich mir deinen -11 Tracker anschaue versendet der kein WIDE1-1 im Pfad - somit wird das Paket nicht gedigipeatet. Für einen Test solltest Du beim Tracker WIDE1-1 in den Pfad einbauen, dann sollte das Paket auch gedigipeatet werden. Wenn das dann geht kommt der zweite wichtige Punkt, den man im Zusammenhang mit APRS wissen muss: Als Zusammenfassung:
Empfehlung:
73 |
Beta Was this translation helpful? Give feedback.
-
Hallo Wolfgang, ok, das ist dann ungünstig wenn beim Cube der Pfad nicht angepasst werden kann. Der -15 ist der Split-Frequenz-Digi von Ricardo, richtig (RX .775, TX .900) ? Welches Gerät ist denn aktuell der -13 ? Das ist ein Gerät mit Ricardos Software, welches über den -15 gedigipeatet wird und dann vom -14 empangen wird. Also hier funktioniert die Kette. Ich nehme an das läuft nur zum Test, ansonsten würde es keinen Sinn machen. Dann hast Du ja noch einen Cube als Tracker, oder ? -11 und -9... die senden nur auf der .775, oder ? Grüße |
Beta Was this translation helpful? Give feedback.
-
Hallo Wolfgang, das Problem ist gelöst, Split-Digipeating funktioniert wieder. Grüße |
Beta Was this translation helpful? Give feedback.
-
Hallo Wolfgang, '73 |
Beta Was this translation helpful? Give feedback.
-
Great News let me know how it goes ;) |
Beta Was this translation helpful? Give feedback.
-
Ich möchte einen Digi auf einen Berg (ca. 2Km Entfernung) aufstellen und dann weiterleiten zu meinem iGate zu Hause, und dann in das APRS-Netz senden.
Meine Einstellungen : RX 433.775MHz aktiv , TX 433.775MHz aktiv , Digimode aktiv , Baken RF aktiv (sendet auch) , APRS-IS off .
Auf APRS. fi wird auch mein QTH angezeigt , Gerät ist TTGO LORa32 T3_V1.6.1 mit SW-V1.0.4.2 ,aber Digi funktioniert nicht, (zu Hause als iGate OK!) . Was mache ich Falsch...?
Beta Was this translation helpful? Give feedback.
All reactions