diff --git a/content/blog/november-update-tuned-in.md b/content/blog/november-update-tuned-in.md index 6f62762d..4e5ad2a5 100644 --- a/content/blog/november-update-tuned-in.md +++ b/content/blog/november-update-tuned-in.md @@ -129,7 +129,7 @@ The PineBuds Pro were first revealed in an [April fools joke](https://www.pine64 **Thanks to [Ralim](https://twitter.com/RalimTek) for the pictures :)** -The PineBuds Pro have been designed to ‘just-work’ for those who simply want a pair of wireless IEMs while, simultaneously, offering hackers and tinkerers everything they need from the get-go. The cradle has a built-in throughpass for UART used for firmware flashing. Each of the buds is exposed individually so two UARTs are present when the cradle housing both buds is connected to a computer. There will be three different SDKs available for you to play with - one of which should [already be available](https://files.pine64.org//SDK/PineBudsPro/PineBudsPro_SDK-20220916.7z) for download. The SDKs have already been tested and I’ve been told they work - more on this later. In time, we should see community firmware that allows for altering the touch controls, buds core behaviour and possibly also allowing for inclusion of new features. Most importantly, however, custom firmware will allow you to flash custom sound signatures adjusted for your individual ear canal resonance frequencies. The BES2300 - the chips at the heart of the PineBuds Pro -  was seriously considered for hearing-aids, so there is a potential that the PineBuds Pro could serve as over-the-counter (OTC) hearing-aids for people with very limited hearing impairment.  +The PineBuds Pro have been designed to ‘just-work’ for those who simply want a pair of wireless IEMs while, simultaneously, offering hackers and tinkerers everything they need from the get-go. The cradle has a built-in throughpass for UART used for firmware flashing. Each of the buds is exposed individually so two UARTs are present when the cradle housing both buds is connected to a computer. There will be three different SDKs available for you to play with - one of which should [already be available](https://files.pine64.org/SDK/PineBudsPro/PineBudsPro_SDK-20220916.7z) for download. The SDKs have already been tested and I’ve been told they work - more on this later. In time, we should see community firmware that allows for altering the touch controls, buds core behaviour and possibly also allowing for inclusion of new features. Most importantly, however, custom firmware will allow you to flash custom sound signatures adjusted for your individual ear canal resonance frequencies. The BES2300 - the chips at the heart of the PineBuds Pro -  was seriously considered for hearing-aids, so there is a potential that the PineBuds Pro could serve as over-the-counter (OTC) hearing-aids for people with very limited hearing impairment.  I should also mention that the [PineBuds Pro Wiki](https://wiki.pine64.org/wiki/PineBuds_Pro) is already up, with datasheets and schematics. In the coming weeks the Wiki will be edited to include other pertinent documentation and resources; you are welcome to contribute content to the Wiki - indeed, you are asked to do so if you’re an early adopter of the hardware. diff --git a/content/documentation/PineBuds_Pro/Software.adoc b/content/documentation/PineBuds_Pro/Software.adoc index eaa4866b..1a72178b 100644 --- a/content/documentation/PineBuds_Pro/Software.adoc +++ b/content/documentation/PineBuds_Pro/Software.adoc @@ -25,5 +25,5 @@ Flash back factory default firmware using Windows based utility: == SDK -* https://files.pine64.org//SDK/PineBudsPro/PineBudsPro_SDK-20221128.7z[PineBuds Pro "Little Whale" SDK date:20221128] +* https://files.pine64.org/SDK/PineBudsPro/PineBudsPro_SDK-20221128.7z[PineBuds Pro "Little Whale" SDK date:20221128] diff --git a/content/documentation/PinePhone_Pro/Software/Releases.adoc b/content/documentation/PinePhone_Pro/Software/Releases.adoc index 51592910..74f4f419 100644 --- a/content/documentation/PinePhone_Pro/Software/Releases.adoc +++ b/content/documentation/PinePhone_Pro/Software/Releases.adoc @@ -9,8 +9,32 @@ menu: weight: 3 --- +:toc: +:toclevels: 1 + This page contains a list of all available releases and tools for the link:/documentation/PinePhone_Pro[PinePhone Pro]. +== Factory builds + +These are two operating system builds that was preloaded in the factory with testing utility. + +Download the build, extract the image and dd it to a 8 GB or larger microSD card, then insert it into the PinePhonePro. Press "RES" button for two seconds when power up, follows on screen instruction and apply the build from microSD card to eMMC. + +[cols="1,1,1,1"] +|=== +| Distribution | Download Link | File Size | MD5 + +| Sailfish with RK2AW +| https://files.pine64.org/os/PinePhonePro/ppp-factory-image-20231118.img.gz[ppp-factory-image-20231118.img.gz] +| 447MB +| _4e31e0a6b0999e3e3df45f86a7dc9c33_ + +| Manjaro with Tow-Boot +| https://files.pine64.org/os/PinePhonePro/Manjaro-ARM-plasma-mobile-pinephonepro-factory-20211212.img.xz[Manjaro-ARM-plasma-mobile-pinephonepro-factory-20211212.img.xz] +| 1.37GB +| _b82ba02287c1699b14fed403ce485b44_ +|=== + == Arch Linux ARM image:/documentation/images/Archlinux-logo.png[width=100] diff --git a/content/documentation/Quartz64/Software/Releases.adoc b/content/documentation/Quartz64/Software/Releases.adoc index ddf88ce5..642fe61f 100644 --- a/content/documentation/Quartz64/Software/Releases.adoc +++ b/content/documentation/Quartz64/Software/Releases.adoc @@ -175,13 +175,3 @@ Notes: * For Windows OS environment please install the https://files.pine64.org/os/Quartz64/android/DriverAssitant_v5.1.1.zip[DriverAssistant v5.11] driver first * The OTG port located at top USB 2.0 port on top of USB 3.0 port, needs USB type A to type A cable. * Please allow 3-5 minutes boot up time on first time for initialization - -==== Android 11 eink SDK - -This the *Android 11 eink SDK* build for 10.3" e-ink panels on the Quartz64 Model A. - -Download: - -* http://files.pine64.org/SDK/Quartz64/QUARTZ64-model-A_eink.android11_SDK.tar.gz[Direct download] from _pine64.org_ (72.88GB, MD5 of the TAR-GZip file _293a550584298de4fb95ceae18103672_, build 20210604) -* Just the boot blobs (<1MB): https://wiki.pine64.org/wiki/File:Rk35-blobs.tar.gz - diff --git a/content/documentation/ROCK64/Software/Releases.adoc b/content/documentation/ROCK64/Software/Releases.adoc index bd367004..c299f600 100644 --- a/content/documentation/ROCK64/Software/Releases.adoc +++ b/content/documentation/ROCK64/Software/Releases.adoc @@ -204,9 +204,9 @@ Download: WARNING: Outdated release -* https://files.pine64.org/os/ROCK64/nextcloudplus/NextCloudPi_Rock64_03-10-19.img.xz[Direct download from pine64.org] +* https://files.pine64.org/os/ROCK64/nextcloudplus/NextCloudPi_Rock64_08-01-19.img.gz[Direct download from pine64.org] -NOTE: The MD5 hash of the .xz file is _1432c8b8082696f38770004b3cb5ac1e_ +NOTE: The MD5 hash of the .gz file is _2d3eb799e99a3bb90d5aa7731baf27c6_ |=== 2+| Default credentials @@ -225,13 +225,13 @@ Download: * https://github.com/ayufan-rock64/linux-build/releases/[Releases on ayufan's github] * https://files.pine64.org/os/ROCK64/omv/jessie-openmediavault-rock64-0.5.15-136-armhf_sd2emmc.img.xz[Direct download from pine64.org (32 bit armhf)] - -NOTE: The MD5 hash of the .xz file is _7E423EF9146EA15403E7D1B4EA30594A_ - -Notes: - -* Shorting the eMMC PIN with a jumper as shown on the 1st image of https://files.pine64.org/doc/rock64/guide/ROCK64_Installing_Android_To_eMMC.pdf[Guide to install stock Android build to eMMC module]. After power ON the box for 2-3 second, quickly remove the jumper. After boot, it will prompt for confirmation 'Y' to start writing the new image to the eMMC. Then follow the instructions on the screen -* There's a bug with eMMC in the "Stable" version of openmediavault linked from the wiki page. In order to use eMMC, please you need to be on the latest (pre-release) version which is linked here https://github.com/ayufan-rock64/linux-build/releases +* https://files.pine64.org/os/ROCK64/omv/stretch-openmediavault-rock64-0.9.14-1159-arm64.img.xz[Direct download from pine64.org (64 bit arm64)] + +NOTE: The MD5 hash of the .xz file is _474c2a5aac8874fd188404c8e04e53e8_ + +* https://files.pine64.org/os/ROCK64/omv/stretch-openmediavault-rock64-0.9.14-1159-armhf.img.xz[Direct download from pine64.org (32 bit armhf)] + +NOTE: The MD5 hash of the .xz file is _bf5d2ea2bc7a5623ba958ed358a80c2a_ |=== 2+| Default credentials @@ -450,33 +450,10 @@ Notes: * See link:/documentation/ROCK64/Further_information/MAC_address[MAC address] on how to set the MAC address. -=== Android 7.x - -The Android 7.1.2 stock image for microSD boot (rooted), build 20171204. - -Download: - -* https://files.pine64.org/os/ROCK64/android/rock64_20171204_stock_android_7.1.2_rooted_sdboot.img.xz[Direct download] from _pine64.org_ (544MB) - -NOTE: The MD5 hash of the .xz file is _56520ED3DB6E587DA140AD314A055EB2_ - -Notes: - -* Write the image to a microSD card using _dd_ and boot it. -* Please allow 10-15 minutes on first boot for initialization -* Has USB 3.0 patches -* Enable the _Real Time Clock support_ for the _Popcorn Hour Transformer_ - === Android TV 7.x eMMC The *Android TV 7.1* community build image by ayufan. -Download image (microSD card to eMMC): - -* https://files.pine64.org/os/ROCK64/android/android-7.1-rock-64-rock64_atv-v0.3.4-r86-raw_sd2emmc.img.xz[Direct download] from _pine64.org_ (716MB, MD5 of the .xz file _6FD1FA4BE87EC2D4E0862F66541BC6F0_) - -NOTE: Write the image to microSD card, for example using _dd_. Shorting the eMMC PIN with a jumper as shown on the first image of the https://files.pine64.org/doc/rock64/guide/ROCK64_Installing_Android_To_eMMC.pdf[guide to install stock Android build to eMMC module]. After power ON the box for 2-3 second, quickly remove the jumper. After boot, it will prompt for confirmation 'Y' to start writing the new image to the eMMC. Then follow the instructions on the screen. - Download image (eMMC): * https://github.com/ayufan-rock64/android-7.1/releases/latest[Direct download latest release build from ayufan github and look for android-7.1-rock-64-rock64_atv-x.x.x-xx-update.zip] @@ -503,7 +480,7 @@ The *Android P SDK* (v9.0). Download: -* https://files.pine64.org//SDK/ROCK64/ROCK64_SDK_android9.0.tar.gz[Direct Download] from _pine64.org_ (104.34GB) +* https://files.pine64.org/SDK/ROCK64/ROCK64_SDK_android9.0.tar.gz[Direct Download] from _pine64.org_ (104.34GB) NOTE: The MD5 hash of the TAR-GZip file is _1EAC08942E238293E3AF11C7890DF307_ diff --git a/content/documentation/ROCKPro64/Software/Releases.adoc b/content/documentation/ROCKPro64/Software/Releases.adoc index 5afce47c..04f7b438 100644 --- a/content/documentation/ROCKPro64/Software/Releases.adoc +++ b/content/documentation/ROCKPro64/Software/Releases.adoc @@ -544,31 +544,6 @@ image:/documentation/images/Android_logo_2019_(stacked).svg[width=100] === Android 7.1.2 -*Stock for DD method [eMMC Boot] [20180809]* -* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using https://www.balena.io/etcher/[Etcher] or another specialized SD writing tool is preferred. -* Please allow 3-5 minutes boot up time on first time for initialization -* This build supports PINE64 7" LCD panel with tablet UI (not Android TV) -* http://files.pine64.org/os/ROCKPro64/android/ROCKPro64_dd_20180809_stock_android_7.1_emmcboot.img.gz[Direct download from pine64.org] -** MD5 (XZ file): 00F194017557017C2588724686E90CEA -** File Size: 498MB - -*Stock for RK Flash tool [eMMC Boot] [20180809]* -* Please unzip first and then using Android tool to flash in -* The OTG port located at USB type-C connector, needs USB type A to type C cable. -* Please allow 3-5 minutes boot up time on first time for initialization -* This build supports PINE64 7" LCD panel with tablet UI (not Android TV) -* http://files.pine64.org/os/ROCKPro64/android/ROCKPro64_20180809_stock_android_7.1_emmcboot.img.gz[Direct download from pine64.org] -** MD5 (XZ file): 197A9905B48441D8655E7542F4643FE9 -** File Size: 483MB - -*Stock for DD method [microSD Boot] [20180920]* -* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using https://www.balena.io/etcher/[Etcher] or another specialized SD writing tool is preferred. -* Please allow 3-5 minutes boot up time on first time for initialization -* This build supports PINE64 7" LCD panel with tablet UI (not Android TV) -* http://files.pine64.org/os/ROCKPro64/android/ROCKPro64_20180920_stock_android_7.1_sdboot.img.gz[Direct download from pine64.org] -** MD5 (XZ file): CE39642A379B357BB3E4BC80ACA2E0CE -** File Size: 765MB - *Stock for DD method [eMMC Boot] [20180518]* * Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using https://www.balena.io/etcher/[Etcher] or another specialized SD writing tool is preferred. * Please allow 3-5 minutes boot up time on first time for initialization @@ -586,14 +561,6 @@ image:/documentation/images/Android_logo_2019_(stacked).svg[width=100] ** MD5 (XZ file): 90C1991DADAE13ADC94E927F171F8920 ** File Size: 342MB -*Stock for install from SDcard to eMMC [microSD Boot] [20180921]* -* Use 'dd' to write the image to the eMMC module using the USB-to-eMMC adapter module and boot. Using https://www.balena.io/etcher/[Etcher] or another specialized SD writing tool is preferred. -* Please allow 3-5 minutes boot up time on first time for initialization -* This build supports PINE64 7" LCD panel with tablet UI (not Android TV) -* http://files.pine64.org/os/ROCKPro64/android/ROCKPro64_20180921_stock_android_7.1_sdboot.img.xz[Direct download from pine64.org] -** MD5 (XZ file): c6900e82a1d6ef397dcac241f76f43c9 -** File Size: 350MB - === Android SDK *Android P SDK [v9.0]* diff --git a/content/documentation/SOEDGE/Releases.adoc b/content/documentation/SOEDGE/Releases.adoc index 25f5bce6..d98c885d 100644 --- a/content/documentation/SOEDGE/Releases.adoc +++ b/content/documentation/SOEDGE/Releases.adoc @@ -17,7 +17,7 @@ Releases for the SOEDGE. Download: -* https://files.pine64.org//os/SOEdge/stock/SOEdge_linux_v1.1.img.gz[SOEdge_linux_v1.1.img.gz] from _pine64.org_, MD5 (GZip file): 636ebeb66d6d0fc0929397d541b0ce83, size: 119MB +* https://files.pine64.org/os/SOEdge/stock/SOEdge_linux_v1.1.img.gz[SOEdge_linux_v1.1.img.gz] from _pine64.org_, MD5 (GZip file): 636ebeb66d6d0fc0929397d541b0ce83, size: 119MB Notes: diff --git a/content/documentation/_index.adoc b/content/documentation/_index.adoc index 437c6c0d..94323840 100644 --- a/content/documentation/_index.adoc +++ b/content/documentation/_index.adoc @@ -45,6 +45,7 @@ link:Pinebook_Pro[Pinebook Pro] + | Single-board computers a|link:Ox64[Ox64] + +link:Oz64[Oz64] + link:STAR64[STAR64] + link:Quartz64[Quartz64] + link:QuartzPro64[QuartzPro64] +