SCPI_COMMANDS.md

SCPI Commands

This file lists the SCPI commands implemented in the firmware.

Mandated and required SCPI commands are recognised as well, but may not perform as expected.

*RCL {preset}

Restore a saved preset. preset must be between 1 and 9.

SYSTem:ERRor[:NEXT]?

Returns and at the same time deletes the oldest entry in the error queue.

SYSTem:ERRor:COUNt?

Returns the number of entries in the error queue.

SYSTem:VERSion?

Returns the version of SCPI (Standard Commands for Programmable Instruments) that the instrument complies with.

DISPlay:BRIGhtness {level}

Set the display's brightness level. level must be between 0 and 5.

DISPlay:BRIGhtness?

Returns the display's brightness level.

DISPlay:LANGuage {language}

Set the front panel language. language is either a number between 0 and 4 or ENGLISH, CHINESE, GERMAN, FRENCH or RUSSIAN.

DISPlay:LANGuage?

Returns the front panel language.

SYSTem:DATE {year} {month} {day}

Set the power supply date.

SYSTem:DATE?

Returns the power supply date.

SYSTem:TIME {hour} {minute} {second}

Set the power supply time of day.

SYSTem:TIME?

Returns the power supply time of day.

OUTPut[:STATe] {0 | 1 | on | off}

The output state.

OUTPut[:STATe]?

Returns the output state.

OUTPut:MODE?

The output mode, either CV or CC.

[SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude] {voltage}

Set the output voltage.

[SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?

Returns the output voltage.

[SOURce]:VOLTage:PROTection:TRIPped?

Returns whether the OVP is tripped.

[SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude] {current}

Set the output current.

[SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude]?

Returns the output current.

[SOURce]:CURRent:PROTection:TRIPped?

Returns whether the OCP is tripped.

MEASure[:SCALar]:VOLTage[:DC]?

Returns the measured output voltage.

MEASure[:SCALar]:CURRent[:DC]?

Returns the measured output current.

MEASure[:SCALar]:POWer[:DC]?

Returns the measured output power.

MEASure[:SCALar]:TEMPerature[:THERmistor][:DC]? {SYSTEM | PROBE}

Returns the system or probe temperature.

[SOURce]:VOLTage:LIMit {voltage}

Set the Over-Voltage Protection value.

[SOURce]:CURRent:LIMit {current}

Set the Over-Current Protection value.

SYSTem:BEEPer:STATe {0 | 1 | on | off}

Control the buzzer.

SYSTem:BEEPer:STATe?

Returns the buzzer state.