Availability of Pre Made PC boards and Case? #24
Replies: 16 comments 15 replies
-
|
Hi. Sorry but no, I don't have premade boards. If you want to order some I recommend you JLCPCB, they are very cheap and for now I had no issues with them. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Is a BOM available? Esp for the connectors used and where to get them? |
Beta Was this translation helpful? Give feedback.
-
|
I too was hoping for a way to purchase a PCB rather than having to deal with MOQ and offshore shipping times. Anyone know if there's a service that does this for small things? I'm guessing it's too small (and/or too unassembled) for massdrop and crowdsupply. |
Beta Was this translation helpful? Give feedback.
-
|
JLCPCB offers really cheap PCBs and even has an assembly service, I always use it. You can order from 5 to as many as you want, and 5 PCB's cost 2$. The service is very cheap but the shipping is around 25-30€ (unless you use cainiao but I would warn you that it takes ages to get things and is not the most reliable service...) |
Beta Was this translation helpful? Give feedback.
-
|
I have several boards (3 of them) extra….
So if you want I would sell you one…10 dollars + shipping.
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
Skype: Theodore.Killmeyer
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Mobile: +1 (720) 937-0281
From: Mark ***@***.***>
Sent: Sunday, September 10, 2023 7:27 PM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
I too was hoping for a way to purchase a PCB rather than having to deal with MOQ and offshore shipping times. Anyone know if there's a service that does this for small things? I'm guessing it's too small (and/or too unassembled) for massdrop and crowdsupply.
—
Reply to this email directly, view it on GitHub <#24 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNRW3KQ6RAZSADBLIPTXZZZHDANCNFSM6AAAAAAROHWDAQ> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNSR755FXAO6FGJPGEDXZZZHDA5CNFSM6AAAAAAROHWDASWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQANI7PK.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Hi Ted, Do you still have those extra boards, out of luck? Thanks! Mathieu |
Beta Was this translation helpful? Give feedback.
-
|
Hi Ted, I am interested in some PCBs too... is still available? Best regards, Jwildesbr |
Beta Was this translation helpful? Give feedback.
-
|
pcbway I think has a site where projects can be published and people can order hardware easily (if I understand correctly thing behind https://www.pcbway.com/project/shareproject/). Probably jlpcb has something similar. Maybe logicanalyzer could be provided as such project, so just click and go with ordering hardware? |
Beta Was this translation helpful? Give feedback.
-
|
This design looks great and I would really like a better analyser. the 100MHz version seems ideal for me. |
Beta Was this translation helpful? Give feedback.
-
|
If you are not in a hurry I would recommend you to wait a bit, I'm testing a new design ;) Else you have to export the Gerber files from KiCad, I don't include the gerber files because each manufacturer can have different requirements for the files and is better to ensure you export according to their parameters. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Hi interested on purchase a pair fully assembled. Tryed contact you by linkedin bcause dont't know if you're still operative here. Both same area. |
Beta Was this translation helpful? Give feedback.
-
|
Many thanks for your reply - much appreciated.
I'll try the Kicad route but I don't really get on with it very well - I'm
a bit old school.
Good luck with the new design - if you get round/solve the Pi problem it
should be brilliant.
Phil
…On Sat, Sep 14, 2024 at 8:40 PM Agustín Gimenez Bernad < ***@***.***> wrote:
If you are not in a hurry I would recommend you to wait a bit, I'm testing
a new design ;)
I will receive the first ones assembled in a couple of weeks and if
everything works ok I will show it here.
Else you have to export the Gerber files from KiCad, I don't include the
gerber files because each manufacturer can have different requirements for
the files and is better to ensure you export according to their parameters.
Cheers.
—
Reply to this email directly, view it on GitHub
<#24 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIMCNF6JKD2YW24Y6NNCBSDZWSGL5AVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRUHA3DAMA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Following on:-
I have installed and used Kicad 8.0 to extract Gerber files.
The format seems suitable for my manufacturer as displayed by Viewmate.
I may have to change the layer names but I have to do that anyway with my
current software.
The boards seem to be v4.0 - is that currently correct and used with v5
software/firmware?
I'll wait a bit to see what transpires in the next few weeks but as I said
100MHz would be easily sufficient for my purposes.
Thanks
Phil
…On Sun, Sep 15, 2024 at 12:24 AM Philip Walker ***@***.***> wrote:
Many thanks for your reply - much appreciated.
I'll try the Kicad route but I don't really get on with it very well - I'm
a bit old school.
Good luck with the new design - if you get round/solve the Pi problem it
should be brilliant.
Phil
On Sat, Sep 14, 2024 at 8:40 PM Agustín Gimenez Bernad <
***@***.***> wrote:
> If you are not in a hurry I would recommend you to wait a bit, I'm
> testing a new design ;)
> I will receive the first ones assembled in a couple of weeks and if
> everything works ok I will show it here.
>
> Else you have to export the Gerber files from KiCad, I don't include the
> gerber files because each manufacturer can have different requirements for
> the files and is better to ensure you export according to their parameters.
>
> Cheers.
>
> —
> Reply to this email directly, view it on GitHub
> <#24 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AIMCNF6JKD2YW24Y6NNCBSDZWSGL5AVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRUHA3DAMA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes, that's correct, has been a while since the last change in the hardware, all that has changed is the firmware/software. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
If anyone is intereseted there is a new design that I'm testing and I will have some spares, they are fully assembled except for the pico itself. Check main page for a picture of the new design. |
Beta Was this translation helpful? Give feedback.
-
|
I am definitely interested in one of the spares. |
Beta Was this translation helpful? Give feedback.
-
|
Another expression of interest in a V6.0/RP2350 compatible breakout/buffer board in a "ready to run" format. Either as part of a testing effort, or as part of a production run. |
Beta Was this translation helpful? Give feedback.
-
|
Likewise, I am also interested in one of the mostly-assembled boards, either in testing or as part of a production run. |
Beta Was this translation helpful? Give feedback.
-
|
I am also interested in the new version and would love to get a populated PCB! please let us know when they would be available! Thank you for this great project! |
Beta Was this translation helpful? Give feedback.
-
|
If you check the last message is already arranged and all the spare ones have been reserved, but after these are sent if all goes ok I will start a tindie shop and will deliver these regularly. Contact me through logicanalyzerorders@gmail.com and I will notify you when there are more available. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
I am definitely interested in purchasing a board. |
Beta Was this translation helpful? Give feedback.
-
|
This weekend will see how I can organize it, I will update this post with more info 😄 Cheers |
Beta Was this translation helpful? Give feedback.
-
|
Wow, I just found out about this project and I'm also very interested in a kit. |
Beta Was this translation helpful? Give feedback.
-
|
Same here, I'm a student and having a 200MHz cheap logic analyzer like this would be really handy, thank you |
Beta Was this translation helpful? Give feedback.
-
|
That's great news! Count me in for a ready-made board, please! Thanks a lot! |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the delay, I'm really busy right now with my job, will try to sort things this weekend. Cheers. |
Beta Was this translation helpful? Give feedback.
-
|
Well I am trying to get the Version 2 BOM and Board files so I can make several for myself… So at this time, sorry I have none to sell but the one I made in the begining
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
From: p3t3rm0v ***@***.***>
Sent: Friday, October 4, 2024 10:54 AM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
Hi interested on purchase a pair fully assembled. Tryed contact you by linkedin bcause dont't know if you're still operative here. Both same area.
—
Reply to this email directly, view it on GitHub <#24 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNTYQLP4QEDGFDFNONTZZ3I25AVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBUG4ZTEMY> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNUWTDZGAV4UYK4STYLZZ3I25A5CNFSM6AAAAABJCCV4IOWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAUWCFW.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Ok, I got things sorted. I have 6 spare units, they come with all assembled except for the pico, you can add a pico or a pico 2, the design works with both. Each unit will be 25€ plus shipping, payment through paypal, I will send the units on next friday after receiving payment. To do the order contact me through logicanalyzerorders@gmail.com and we will arrange it. I will send you the latest firmware and a link to the latest software version for your OS, so remember to state in the order:
Once I receive the order will check the delivery costs to your address and will send you the total ammount to be paid (if you have a cheaper delivery option than the one I find I gladly will give you my address so you can arrange the package pickup). And if this goes well I might open a store in tindie as I have some other projects that I will publish soon and can be good to have them available 😄 Cheers! |
Beta Was this translation helpful? Give feedback.
-
|
Ok I will contact you… I might also want to just get the Version 2 PC board…. We will see when you get your Tindie shop up…
Regards,
Ted Killmeyer
…___________________________
Theodore Paul Killmeyer Jr.
(USS Nevada SSBN 733 Plank Owner)
Computer Engineer
Electrical Engineer
Senior Systems Architect
Skype: Theodore.Killmeyer
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Email: ***@***.***> ***@***.***
Mobile: +1 (720) 937-0281
From: Agustín Gimenez Bernad ***@***.***>
Sent: Sunday, October 6, 2024 3:19 AM
To: gusmanb/logicanalyzer ***@***.***>
Cc: tkiller99999 ***@***.***>; Author ***@***.***>
Subject: Re: [gusmanb/logicanalyzer] Availability of Pre Made PC boards and Case? (Discussion #24)
@ORARadwan <https://github.com/ORARadwan>
If you check the last message is already arranged and all the spare ones have been reserved, but after these are sent if all goes ok I will start a tindie shop and will deliver these regularly.
Contact me through ***@***.*** ***@***.***> and I will notify you when there are more available.
Cheers.
—
Reply to this email directly, view it on GitHub <#24 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATCQLNSIO3J7HRVQB4LCRCTZ2EFBPAVCNFSM6AAAAABJCCV4IOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBVG42TMNI> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ATCQLNSJQGCFYV63KDKSDJTZ2EFBPA5CNFSM6AAAAABJCCV4IOWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAUWWF2.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
I would also like to have one o the pre assembled new boards. |
Beta Was this translation helpful? Give feedback.
-
|
All have been sent but next week I will order more, contact me at logicanalyzerorders@gmail.com and I will send you an email when they are available. Cheers. |
Beta Was this translation helpful? Give feedback.
-
OK.. So call me Lazy.... But
Do you have premanufactured PC boards? and the Printed Case available?
I know I can send off the design files to PCBWay or another PC factory... but I would rather the creator gets the Money.
Ted Killmeyer
Beta Was this translation helpful? Give feedback.
All reactions