AP Fall Back mode

[surajchauhan6631]

I just want to confirm what is use of AP Fall back mode. My ESPIxelstick will run remote file stored on sd card. And because there will be no access to wifi router where espixelstick will be stored. so i can't connect to esp32 through my network wifi. For that reason i have to connect directly to espixelstick wifi. For that reason what should i choose, AP FallBACK, reboon on fail, and what is stay in AP Mode.

[MartinMueller2003]

You want to set AP fallback to yes. This causes the ESP to go into AP mode so you can connect to it.
You need to set Stay in AP mode so that the ESP does not cycle between AP mode and trying to connect to a WiFi Router. Reboot on fail means: If the esp could not connect to a WiFi router AND no one connected to the ESP in AP mode then reboot the ESP. You want to turn that off.

[MartinMueller2003]

You can configure the passphrase ro that only you can attach to the ESP.

[surajchauhan6631]

Wifi connection with espixelstick in ap mode keep getting disconnected while i am setting the output 1 to dmx output and secondary input to fpp remote As soon as i click on save changes button and again i have to choose dmx to output 1. If i set set output 1 to dmx and choose secondary input to effects and click on save changes button every works fine.

[MartinMueller2003]

Please include the console log. Not much I can do without it.

[surajchauhan6631]

Is your latest ci build is stable ?

[MartinMueller2003]

Yes my latest CI build is stable.
Also, you can use the "experimental" build at espixelstickwebflasher.from-ct.com:5000
Or the latest CI build from the Forkineye. He integrated my changes a few days ago.