tests.yml

name: Tests
on:
  - push
  - pull_request

jobs:
  build-microceph:
    name: Build microceph snap
    runs-on: ubuntu-22.04
    env:
      SNAPCRAFT_BUILD_ENVIRONMENT: "lxd"
    steps:
      - name: Checkout code
        uses: actions/checkout@v3
        with:
          fetch-depth: 0

      - name: Copy utils
        run: cp tests/scripts/actionutils.sh $HOME

      - name: Clear FORWARD firewall rules
        run: ~/actionutils.sh cleaript

      - name: Install dependencies
        run: |
          ~/actionutils.sh setup_lxd

          sudo snap install snapcraft --classic
          snap list

      - name: Build snaps
        run: snapcraft

      - name: Upload snap artifact
        if: always()
        uses: actions/upload-artifact@v3
        with:
          name: snaps
          path: "*.snap"
          retention-days: 5

  unit-tests:
    name: Run Unit tests
    runs-on: ubuntu-22.04
    steps:
      - name: Checkout code
        uses: actions/checkout@v3
        with:
          fetch-depth: 0

      - name: Install dependencies
        run: |
          sudo add-apt-repository ppa:dqlite/dev -y --no-update
          sudo apt-get update
          sudo apt-get install -y libdqlite-dev

      - name: Install Go (1.21)
        uses: actions/setup-go@v5
        with:
          go-version: 1.21.x

      - name: Run unit-tests
        run: |
          cd microceph
          make check-unit

  single-system-tests:
    name: Single node with encryption
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install and setup
      run: |
        ~/actionutils.sh install_microceph

        set -uex
        # Verify metadata.yaml
        meta=/var/snap/microceph/current/conf/metadata.yaml
        cat $meta
        grep -q ceph-version $meta

        # Verify health and auto crush rule
        sudo microceph.ceph health | grep -q "OSD count 0 < osd_pool_default_size 3"
        sudo microceph.ceph osd crush rule ls | grep -F microceph_auto_osd

    - name: Add OSD with failure
      run: |
        set -eux
        loop_file="$(sudo mktemp -p /mnt XXXX.img)"
        sudo truncate -s 1G "${loop_file}"
        loop_dev="$(sudo losetup --show -f "${loop_file}")"

        minor="${loop_dev##/dev/loop}"
        sudo mknod -m 0660 "/dev/sdi21" b 7 "${minor}"

        set +e
        rc=$(sudo microceph disk add --wipe "/dev/sdi21" --encrypt |& grep -c Failure)
        if [[ $rc -eq 0 ]] ; then echo "FDE should fail without dmcrypt: $rc"; exit 1; fi

        # actually creating additional loop devices is not required since this should fail in validation.
        rc=$(sudo microceph disk add "/dev/sdi21" "/dev/sdi22" --wal-device "/dev/sdi23" |& grep -c "not supported for batch disk addition")
        if [[ $rc -eq 0 ]] ; then echo "Batch disk addition should fail with wal device: $rc"; exit 1; fi

        rc=$(sudo microceph disk add "/dev/sdi21" "/dev/sdi22" --db-device "/dev/sdi23" |& grep -c "not supported for batch disk addition")
        if [[ $rc -eq 0 ]] ; then echo "Batch disk addition should fail with db device: $rc"; exit 1; fi

    - name: Add OSDs
      run: |
        ~/actionutils.sh add_encrypted_osds
        ~/actionutils.sh add_lvm_vol

    - name: Enable RGW
      run: ~/actionutils.sh enable_rgw

    - name: Run system tests
      run: |
        set -eux
        # List disks
        sudo microceph disk list
        # Show ceph's status
        sudo microceph.ceph status
        # Ceph status expectations for a single node cluster
        test_single() {
            local status="$1"
            ( echo "$status" | grep -qF "mon: 1 daemons" ) || { echo fail ; return ; }
            ( echo "$status" | grep -qE "mgr: .*active, " )|| { echo fail ; return ; }
            ( echo "$status" | grep -qF "osd: 3 osds" )    || { echo fail ; return ; }
            ( echo "$status" | grep -qF "rgw: 1 daemon" )  || { echo fail ; return ; }
            echo ok
        }
        # Confirm ceph is healthy and services started
        res=$( test_single "$( sudo microceph.ceph status )" )
        [ $res = "ok" ] || { echo "single node status fails" ; exit 1 ; }
        # Check health after restart
        sudo snap stop microceph
        sudo snap start microceph
        for i in $(seq 1 16); do
            status=$( sudo microceph.ceph status )
            echo "$status"
            res=$( test_single "$status" )
            if [ $res = "ok" ] ; then
                echo "Single tests pass"
                break
            else
                echo "Single tests fail, retry $i/16"
                sleep 15
            fi
        done
        sleep 1
        pgrep ceph-osd || { echo "No ceph-osd process found" ; exit 1; }

    - name: Exercise RGW
      run: ~/actionutils.sh testrgw

    - name: Disable RGW
      run: ~/actionutils.sh disable_rgw

    - name: Enable RGW with SSL enabled
      run: ~/actionutils.sh enable_rgw_ssl

    - name: Exercise RGW with SSL enabled
      run: ~/actionutils.sh testrgw_ssl

    - name: Test Cluster Config
      run: |
        set -eux
        cip=$(ip -4 -j route | jq -r '.[] | select(.dst | contains("default")) | .prefsrc' | tr -d '[:space:]')

        # pre config set timestamp for service age
        ts=$(sudo systemctl show --property ActiveEnterTimestampMonotonic snap.microceph.osd.service | cut -d= -f2)

        # set config
        sudo microceph cluster config set cluster_network $cip/8 --wait

        # post config set timestamp for service age
        ts2=$(sudo systemctl show --property ActiveEnterTimestampMonotonic snap.microceph.osd.service | cut -d= -f2)

        # Check config output
        output=$(sudo microceph cluster config get cluster_network | grep -cim1 'cluster_network')
        if [[ $output -lt 1 ]] ; then echo "config check failed: $output"; exit 1; fi

        # Check service restarted
        if [ $ts2 -lt $ts ]; then echo "config check failed: TS1: $ts2 TS2: $ts3"; exit 1; fi

        # reset config
        sudo microceph cluster config reset cluster_network --wait

        # post config reset timestamp for service age
        ts3=$(sudo systemctl show --property ActiveEnterTimestampMonotonic snap.microceph.osd.service | cut -d= -f2)

        # Check service restarted
        if [ $ts3 -lt $ts2 ]; then echo "config check failed: TS2: $ts2 TS3: $ts3"; exit 1; fi

    - name: Test pool operations
      run: |
        set +e
        sudo microceph.ceph osd pool create mypool
        sudo microceph pool set-rf --size 1 ""
        sudo microceph.ceph config get osd.1 osd_pool_default_size | fgrep -x "1"
        sudo microceph pool list | fgrep "mypool" | fgrep -q " 3 "
        sudo microceph pool set-rf --size 3 mypool
        sudo microceph.ceph osd pool get mypool size | fgrep -x "size: 3"
        sudo microceph pool list | fgrep "mypool" | fgrep -q " 3 "
        sudo microceph pool set-rf --size 1 "*"
        sudo microceph.ceph osd pool get mypool size | fgrep -x "size: 1"
        sudo microceph pool list | fgrep "mypool" | fgrep -q " 1 "

    - name: Test log operations
      run: |
        set +e
        sudo microceph log set-level warning
        output=$(sudo microceph log get-level)
        if [[ "$output" != "3" ]] ; then echo "incorrect log level: $output"; exit 1; fi 

    - name: Print logs for failure
      if: failure()
      run: |
        sudo snap logs microceph -n 1000

    - name: Test square brackets around IPv6
      run: |
        sudo snap remove microceph
        export MON_IP="fd42:7273:f336:a22::1"
        sudo ip -6 addr add dev eth0 "${MON_IP}"
        ~/actionutils.sh install_microceph "${MON_IP}"
        cat /var/snap/microceph/current/conf/ceph.conf
        fgrep -q "[${MON_IP}]" /var/snap/microceph/current/conf/ceph.conf

  multi-node-tests:
    name: Multi node testing
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install dependencies
      run: ~/actionutils.sh setup_lxd

    - name: Create containers with loopback devices
      run: ~/actionutils.sh create_containers public

    - name: Install local microceph snap
      run: ~/actionutils.sh install_multinode

    - name: Bootstrap
      run: ~/actionutils.sh bootstrap_head public

    - name: Setup cluster
      run: ~/actionutils.sh cluster_nodes public

    - name: Verify config
      run: ~/actionutils.sh test_ceph_conf

    - name: Add 2 OSDs
      run: |
        for c in node-wrk1 node-wrk2 ; do
          ~/actionutils.sh add_osd_to_node $c
        done
        lxc exec node-wrk0 -- sh -c "microceph.ceph -s"

    - name: Exercise microceph status
      run: |
        set -uex
        lxc exec node-wrk0 -- sh -c "sudo microceph status"

    - name: Test failure domain scale up
      run: |
        set -uex
        # We still have failure domain OSD
        lxc exec node-wrk0 -- sh -c "sudo microceph.ceph config get mon osd_pool_default_crush_rule" | fgrep -x 1
        # Add a 3rd OSD, should switch to host failure domain
        ~/actionutils.sh add_osd_to_node node-wrk0
        ~/actionutils.sh headexec wait_for_osds 3
        sleep 1
        lxc exec node-wrk0 -- sh -c "sudo microceph.ceph -s"
        # Now default to host rule
        lxc exec node-wrk0 -- sh -c "sudo microceph.ceph config get mon osd_pool_default_crush_rule" | fgrep -x 2
    - name: Test 3 osds present
      run: |
        set -uex
        lxc exec node-wrk0 -- sh -c "microceph.ceph -s" | egrep "osd: 3 osds: 3 up.*3 in"

    - name: Test crush rules
      run: |
        set -uex
        lxc exec node-wrk0 -- sh -c "microceph.ceph osd crush rule ls" | grep -F microceph_auto_host
        lxc exec node-wrk0 -- sh -c "microceph.ceph osd pool ls detail" | grep -F "crush_rule 2"

    - name: Add another OSD
      run: |
        ~/actionutils.sh add_osd_to_node node-wrk3
        ~/actionutils.sh headexec wait_for_osds 4

    - name: Remove OSD again
      run: |
        set -uex
        lxc exec node-wrk0 -- sh -c "microceph disk remove 4"
        lxc exec node-wrk0 -- sh -c "microceph.ceph -s" | egrep "osd: 3 osds: 3 up.*3 in"

    - name: Test migrate services
      run: |
        set -uex
        ~/actionutils.sh test_migration node-wrk1 node-wrk3

    - name: Enable services on wrk1
      run: ~/actionutils.sh headexec enable_services node-wrk1

    - name: Remove OSD again but don't scaledown crush rule.
      run: |
        set -uex
        lxc exec node-wrk0 -- sh -c "microceph disk remove 3 --prohibit-crush-scaledown --bypass-safety-checks"
        lxc exec node-wrk0 -- sh -c "microceph.ceph osd crush rule ls" | grep -F microceph_auto_host

    - name: Re-Add OSD
      run: |
        set -uex
        ~/actionutils.sh add_osd_to_node node-wrk0
        ~/actionutils.sh headexec wait_for_osds 3

    - name: Test remove node wrk3
      run: |
        set -uex
        ~/actionutils.sh headexec remove_node node-wrk3
        if lxc exec node-wrk0 -- sh -c "microceph status" | grep -q "^- node-wrk3 " ; then
            echo "Failed: node-wrk3 still present"
            exit 1
        fi
        output=$(lxc exec node-wrk0 -- sh -c "microceph.ceph -s")
        (echo $output | fgrep "mon: 3 daemons") ||
        (echo $output | grep "mon: 4 daemons.*out of quorum: node-wrk3")

    - name: Test client configurations
      run: ~/actionutils.sh check_client_configs

    - name: Print logs for failure
      if: failure()
      run: |
        sudo snap logs microceph -n 1000

  multi-node-tests-with-custom-microceph-ip:
    name: Multi node testing with custom microceph IP
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install dependencies
      run: ~/actionutils.sh setup_lxd

    - name: Create containers with loopback devices
      run: ~/actionutils.sh create_containers internal

    - name: Install local microceph snap
      run: ~/actionutils.sh install_multinode

    - name: Bootstrap
      run: ~/actionutils.sh bootstrap_head internal

    - name: Setup cluster
      run: ~/actionutils.sh cluster_nodes internal

    - name: Add 3 OSDs
      run: |
        for c in node-wrk0 node-wrk1 node-wrk2 ; do
          ~/actionutils.sh add_osd_to_node $c
        done

    - name: Test 3 osds present
      run: |
        set -uex
        ~/actionutils.sh headexec wait_for_osds 3
        lxc exec node-wrk0 -- sh -c "microceph.ceph -s"

    - name: Print logs for failure
      if: failure()
      run: |
        sudo snap logs microceph -n 1000

  loop-file-tests:
    name: Test with loopback file OSDs
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install and setup
      run: ~/actionutils.sh install_microceph

    - name: Add loopback file OSDs
      run: |
        set -uex
        sudo microceph disk add loop,1G,4
        ~/actionutils.sh wait_for_osds 4
        sudo microceph.ceph -s

    - name: Enable RGW
      run: ~/actionutils.sh enable_rgw

    - name: Exercise RGW
      run: ~/actionutils.sh testrgw

    - name: Remove OSD
      run: |
        set -uex
        sudo microceph disk remove osd.1
        ~/actionutils.sh wait_for_osds 3
        sudo microceph.ceph -s

    - name: Print logs for failure
      if: failure()
      run: |
        sudo snap logs microceph -n 1000

  wal-db-tests:
    name: Test WAL/DB device usage
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install and setup
      run: ~/actionutils.sh install_microceph

    - name: Add loopback file OSDs
      run: |
        set -uex
        sudo microceph disk add loop,1G,3
        ~/actionutils.sh wait_for_osds 3
        sudo microceph.ceph -s

    - name: Add WAL/DB enabled OSD
      run: |
        set -uex
        ~/actionutils.sh create_loop_devices
        sudo microceph disk list
        sudo microceph disk add /dev/sdia --wal-device /dev/sdib --db-device /dev/sdic
        ~/actionutils.sh wait_for_osds 4
        sudo microceph.ceph -s

    - name: Check that disk list doesn't contain WAL/DB blockdevs
      run: |
        set -uex
        sudo microceph disk list
        for d in sdb sdc ; do
            if sudo microceph disk list | grep -q /dev/$d ; then
                echo "Error: found WAL/DB device: /dev/$d"
                exit 1
            fi
        done

    - name: Enable RGW
      run: ~/actionutils.sh enable_rgw

    - name: Exercise RGW
      run: ~/actionutils.sh testrgw

    - name: Print logs for failure
      if: failure()
      run: |
        sudo snap logs microceph -n 1000

  upgrade-quincy-tests:
    name: Test quincy upgrades
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install dependencies
      run: ~/actionutils.sh setup_lxd

    - name: Create containers with loopback devices
      run: ~/actionutils.sh create_containers public

    - name: Install quincy stable from store
      run: ~/actionutils.sh install_store quincy/stable

    - name: Bootstrap
      run: ~/actionutils.sh bootstrap_head

    - name: Setup cluster
      run: ~/actionutils.sh cluster_nodes

    - name: Add 3 OSDs
      run: |
        for c in node-wrk0 node-wrk1 node-wrk2 ; do
          ~/actionutils.sh add_osd_to_node $c
        done
        ~/actionutils.sh headexec wait_for_osds 3

    - name: Enable RGW
      run: ~/actionutils.sh headexec enable_rgw

    - name: Exercise RGW
      run: ~/actionutils.sh headexec testrgw

    - name: Install local build
      run: ~/actionutils.sh upgrade_multinode

    - name: Wait until 3 OSDs are up
      run:  ~/actionutils.sh headexec wait_for_osds 3

    - name: Exercise RGW again
      run: ~/actionutils.sh headexec testrgw

    - name: Exercise microceph status
      run: |
        set -uex
        lxc exec node-wrk0 -- sh -c "sudo microceph status"


  cluster-tests:
    name: Test MicroCeph Cluster features.
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install and setup
      run: ~/actionutils.sh install_microceph

    - name: Add loopback file OSDs
      run: |
        set -uex
        sudo microceph disk add loop,1G,3
        ~/actionutils.sh wait_for_osds 3
        sudo microceph.ceph -s

    - name: Enable RGW
      run: ~/actionutils.sh enable_rgw

    - name: Exercise RGW
      run: ~/actionutils.sh testrgw

    - name: Bombard MicroCeph with cluster configs
      run: ~/actionutils.sh bombard_rgw_configs

    - name: Exercise RGW again
      run: ~/actionutils.sh testrgw "newFile"

  replication-tests:
    name: Test MicroCeph Remote Replication features.
    runs-on: ubuntu-22.04
    needs: build-microceph
    steps:
    - name: Download snap
      uses: actions/download-artifact@v3
      with:
        name: snaps
        path: /home/runner

    - name: Checkout code
      uses: actions/checkout@v3
      with:
        fetch-depth: 0

    - name: Copy utils
      run: cp tests/scripts/actionutils.sh $HOME

    - name: Clear FORWARD firewall rules
      run: ~/actionutils.sh cleaript

    - name: Free disk
      run: ~/actionutils.sh free_runner_disk

    - name: Install dependencies
      run: ~/actionutils.sh setup_lxd

    - name: Create containers with loopback devices
      run: ~/actionutils.sh create_containers public

    - name: Install local microceph snap
      run: ~/actionutils.sh install_multinode

    - name: Bootstrap
      run: ~/actionutils.sh remote_simple_bootstrap_two_sites

    - name: Exchange Cluster tokens
      run: ~/actionutils.sh remote_exchange_site_tokens

    - name: Verify Remote authentication
      run: ~/actionutils.sh remote_perform_remote_ops_check

    - name: Enable RBD Mirror Daemon
      run : ~/actionutils.sh remote_enable_rbd_mirror_daemon

    - name: Configure RBD mirror
      run : ~/actionutils.sh remote_configure_rbd_mirroring

    - name: Wait for RBD mirror to sync images
      run : ~/actionutils.sh remote_wait_for_secondary_to_sync

    - name: Verify RBD mirror
      run : ~/actionutils.sh remote_verify_rbd_mirroring

    - name: Disable RBD mirror
      run : ~/actionutils.sh remote_disable_rbd_mirroring

    - name: Verify Remote removal
      run: ~/actionutils.sh remote_remove_and_verify