Home

OpenFIRE-Firmware Wiki Main Page

If all you're looking for is information about MAMEHOOKER integration, find it here!

Here is where you'll find related miscellanea regarding OpenFIRE (as it's needed).

OpenFIRE Commands - making the most of your guns!

Listed below is a chart of all the common serial commands OpenFIRE recognizes that can be used outside of MAMEHOOKER-type integration. These can be fired one-off through either the command line on Windows or Linux, or in a batch script of some kind, to change some aspects of any lightgun.

To send these commands, use:

• Windows: echo commandsHere > COM#, where # is the assigned COM port of the lightgun, according to Windows' device manager - these are fixed values.
• Linux: echo commandsHere > /dev/ttyACM#, where # is the number assigned to the lightgun's serial port object, ordered from first to last microcontroller plugged in - these are dynamic values and can change depending on the order the guns have been plugged in/recognized by the kernel.

OpenFIRE commands are as follows:

• XR# - Remap to (#) Player, where # is the desired player number. Guns default to the respective keyboard binds for the Basic TinyUSB Identifier selected in the OpenFIRE App, or else falling back to Player 1 binds 1 & 5 for Start & Select for any custom Product ID.
• XI# - Sets Autofire interval (either set via hardware switch, or from an M8x2/M8x1 command); either 2, 3, or 4.