Skip to content

Latest commit

 

History

History
187 lines (131 loc) · 8.42 KB

RELEASING.md

File metadata and controls

187 lines (131 loc) · 8.42 KB

Releasing Software (for Opentrons developers)

Below you will find instructions for the release processes for projects within this monorepo.

Releasing Robot Software Stacks

Overview

The robot release process has 3 main outputs:

  • Opentrons App
  • OT-2 system package
  • Flex system package

The robot software stack is composed of the following repositories:

  • opentrons (this repository)
  • opentrons_modules (module firmware)
  • oe_core (Flex OS)
  • ot3_firmware (Flex firmware)
  • buildroot (OT-2 OS)
flowchart LR
    subgraph Shared ["Shared Repositories"]
    opentrons["Opentrons/opentrons" ]
    opentrons_modules["Opentrons/opentrons-modules" ]
    end

    subgraph Flex ["Flex Only"]
    oe_core["Opentrons/oe-core"]
    ot3_firmware["Opentrons/ot3-firmware" ]
    end

    subgraph OT2 ["OT-2 Only"]
    buildroot["Opentrons/buildroot" ]
    end

    OT2Build["OT-2 System Package"]
    opentrons --> OT2Build
    buildroot --> OT2Build

   App["Opentrons App"]
    opentrons --> App

    FlexBuild["Flex System Package"]
    opentrons --> FlexBuild
    oe_core --> FlexBuild
    ot3_firmware --> FlexBuild
    opentrons_modules --> OT2Build
    opentrons_modules --> FlexBuild
Loading

These are all versioned and released together. These assets are produced in 2 possible channels:

  • Release (External facing releases - stable, beta, alpha)
  • Internal Release (Internal facing releases - stable, beta, alpha)

Tip

using git config remote.origin.tagOpt --tags ensures that when you fetch and pull, you get all the tags from the origin remote.

Steps to release the changes in edge

  1. Checkout edge and make a chore release branch, without any new changes. The branch name should match chore_release-${version}.

    git switch edge
    git pull
    git switch -c chore_release-${version}
    git push --set-upstream origin chore_release-${version}
  2. Open a PR targeting release from chore_release-${version}; this should contain all the changes that were in edge and not yet in release. This PR will not be merged in GitHub. Apply the DO NOT MERGE label. When we are ready, approval and passing checks on this PR allows the bypass of the branch protection on release that prevents direct pushes. Step 8 will resolve this PR.

  3. Evaluate changes on our dependent repositories. If there have been changes to opentrons-modules, oe-core, ot3-firmware, or buildroot, ensure that the changes are in the correct branches. Tags will need to be pushed to repositories with changes. Further exact tagging instructions for each of the repositories are TODO.

  4. Check out and pull chore_release-${version} locally. Create a tag for a new alpha version. The alpha versions end with an -alpha.N prerelease tag, where N increments by 1 from 0 over the course of the QA process. You don't need a PR or a commit to create a new version. Pushing tags in the formats prescribed here are the triggers of the release process. Let's call the alpha version you're about to create ${alphaVersion}:

Important

Use annotated tag (-a) with a message (-m) for all tags.

git switch chore_release-${version}
git pull
git tag -a v${alphaVersion} -m 'chore(release): ${alphaVersion}
  1. Review the tag with git log v${alphaVersion} --oneline -n10. Double check that the commit displayed is the one you want - it should probably be the latest commit in your release branch, and you should double check that with the Github web UI. If the tag looks good, push it - this starts the build process. This is a release candidate that will undergo QA. Changelogs for the release are automatically generated when the tag is pushed and sent to the release page in github.

    git push origin v${alphaVersion}
  2. Run QA on this release. If issues are found, create PRs targeting chore_release-${version}. To create a new alpha releases, repeat steps 4-6.

  3. Once QA is complete, do a final check that the release notes are complete and proof-read.

  4. We are ready to merge -ff-only the chore_release-${version} into release.

Caution

Do NOT squash or rebase

Do NOT yet push a tag

This should be done from your local command line. Here we make use of the PR in step 2 to bypass the branch protection on release. The PR checks must be passing and the PR must have approval:

git switch chore_release-${version}
git pull
git checkout release
git pull
# now do the merge
git merge --ff-only chore_release-${version}
git push origin release
  1. Make a tag for the release. This tag will have the actual target release version, no alpha prerelease tags involved. It should be the same as the ${version} part of your release branch:

    git tag -a v${version} -m 'chore(release): ${version}'
    git log v${version} --oneline -n10

    The git log should reveal that the tag is on what was, pre-merge, the last commit of your release branch and is, post-merge, the last commit of release. You should double-check this with the github web UI.

    Once the tag looks good, you can push it. The tag push will kick off release builds and deploy the results to customers. It will also create a release page where those builds and automatically generated in-depth changelogs will be posted.

    git push origin v${version}
  2. Ensure package deployments succeed by validating the version in our release dockets. The examples below are for the release channel. Internal Release channel looks a little different but are similar and documented elsewhere.

  1. Release the Python Protocol API docs for this version (see below under Releasing Web Projects).

  2. Open a PR of release into edge. Give the PR a name like chore(release): Merge changes from ${version} into edge. Once it passes and has approval, on the command line merge it into edge:

    git checkout edge
    git pull
    git merge --no-ff release
  3. Use the PR title for the merge commit title. You can then git push origin edge, which will succeed as long as the PR is approved and status checks pass.

Releasing Robot Software Stack Isolated changes

If critical bugfixes or isolated features need to be released, the process is the same as above, but the chore_release-${version} branch is not created from edge. We would likely base the chore_release-${version} branch on release then create bug fix PRs targeting chore_release-${version}. Or we might cherry pick in commits and/or merge in a feature branch to chore_release-${version}.

tag usage

We specify the version of a release artifact through a specifically-formatted git tag. We consider our monorepo to support several projects: robot stack, ot3, protocol-designer, etc.

Tags look like this:

${projectPrefix}${projectVersion}

${projectPrefix} is the project name plus @ for everything but robot stack, where it is v.

Examples
  • the tag for 6.2.1-alpha.3 of the robot stack is v6.2.1-alpha.3
  • the tag for 0.1.2-beta.1 of an internal release or robot stack is ot3@0.1.2-beta.1
  • the tag for 4.0.0 of protocol designer is protocol-designer@4.0.0

Versions follow [semver.inc][semver-inc]. QA is done on alpha builds, and only alpha tags should be pushed until you're ready to release the project.

Releasing Web Projects

While our web projects also take their versions from appropriately-prefixed git tags, they will not be automatically deployed.

See scripts/deploy/README.md for the release process of these projects.