diff --git a/configs/sim/gscreen/spartan/spartan.hal b/configs/sim/gscreen/spartan/spartan.hal
index 6a4516e851c..5d40e046850 100644
--- a/configs/sim/gscreen/spartan/spartan.hal
+++ b/configs/sim/gscreen/spartan/spartan.hal
@@ -65,7 +65,7 @@ net xenable         => parport.0.pin-17-out
 net spindle-index   <= parport.0.pin-10-in
 net spindle-phase-a <= parport.0.pin-11-in
 net spindle-phase-b <= parport.0.pin-12-in
-net all-home        <= parport.0.pin-13-in
+#net all-home        <= parport.0.pin-13-in
 
 setp stepgen.0.position-scale [JOINT_0]SCALE
 setp stepgen.0.steplen 1
@@ -73,12 +73,12 @@ setp stepgen.0.stepspace 0
 setp stepgen.0.dirhold 35000
 setp stepgen.0.dirsetup 35000
 setp stepgen.0.maxaccel [JOINT_0]STEPGEN_MAXACCEL
-net xpos-cmd joint.0.motor-pos-cmd => stepgen.0.position-cmd
+net Xpos joint.0.motor-pos-cmd => stepgen.0.position-cmd
 net xpos-fb stepgen.0.position-fb => joint.0.motor-pos-fb
 net xstep <= stepgen.0.step
 net xdir <= stepgen.0.dir
 net xenable joint.0.amp-enable-out => stepgen.0.enable
-net all-home => joint.0.home-sw-in
+#net all-home => joint.0.home-sw-in
 
 setp stepgen.1.position-scale [JOINT_1]SCALE
 setp stepgen.1.steplen 1
@@ -86,12 +86,12 @@ setp stepgen.1.stepspace 0
 setp stepgen.1.dirhold 35000
 setp stepgen.1.dirsetup 35000
 setp stepgen.1.maxaccel [JOINT_1]STEPGEN_MAXACCEL
-net ypos-cmd joint.1.motor-pos-cmd => stepgen.1.position-cmd
+net Ypos joint.1.motor-pos-cmd => stepgen.1.position-cmd
 net ypos-fb stepgen.1.position-fb => joint.1.motor-pos-fb
 net ystep <= stepgen.1.step
 net ydir <= stepgen.1.dir
 net yenable joint.1.amp-enable-out => stepgen.1.enable
-net all-home => joint.1.home-sw-in
+#net all-home => joint.1.home-sw-in
 
 setp stepgen.2.position-scale [JOINT_2]SCALE
 setp stepgen.2.steplen 1
@@ -99,12 +99,12 @@ setp stepgen.2.stepspace 0
 setp stepgen.2.dirhold 35000
 setp stepgen.2.dirsetup 35000
 setp stepgen.2.maxaccel [JOINT_2]STEPGEN_MAXACCEL
-net zpos-cmd joint.2.motor-pos-cmd => stepgen.2.position-cmd
+net Zpos joint.2.motor-pos-cmd => stepgen.2.position-cmd
 net zpos-fb stepgen.2.position-fb => joint.2.motor-pos-fb
 net zstep <= stepgen.2.step
 net zdir <= stepgen.2.dir
 net zenable joint.2.amp-enable-out => stepgen.2.enable
-net all-home => joint.2.home-sw-in
+#net all-home => joint.2.home-sw-in
 
 net estop-out <= iocontrol.0.user-enable-out
 net estop-out => iocontrol.0.emc-enable-in
diff --git a/configs/sim/gscreen/spartan/spartan.ini b/configs/sim/gscreen/spartan/spartan.ini
index 703c32bc41b..c7a3051d47c 100644
--- a/configs/sim/gscreen/spartan/spartan.ini
+++ b/configs/sim/gscreen/spartan/spartan.ini
@@ -45,6 +45,7 @@ CYCLE_TIME = 0.010
 [HAL]
 HALUI = halui
 HALFILE = spartan.hal
+HALFILE = simulated_home.hal
 HALFILE = custom.hal
 POSTGUI_HALFILE = custom_postgui.hal
 
@@ -85,7 +86,7 @@ MIN_FERROR = 0.01
 MIN_LIMIT = -0.01
 MAX_LIMIT = 15.0
 HOME_OFFSET = 0.100000
-HOME_SEARCH_VEL = 0.050000
+HOME_SEARCH_VEL = 0.20000
 HOME_LATCH_VEL = 0.050000
 HOME_SEQUENCE = 1
 
@@ -107,7 +108,7 @@ MIN_FERROR = 0.01
 MIN_LIMIT = -0.01
 MAX_LIMIT = 15.0
 HOME_OFFSET = 0.100000
-HOME_SEARCH_VEL = 0.050000
+HOME_SEARCH_VEL = 0.20000
 HOME_LATCH_VEL = 0.050000
 HOME_SEQUENCE = 2
 
@@ -129,6 +130,6 @@ MIN_FERROR = 0.01
 MIN_LIMIT = -15.0
 MAX_LIMIT = 0.01
 HOME_OFFSET = 0.100000
-HOME_SEARCH_VEL = 0.050000
+HOME_SEARCH_VEL = 0.20000
 HOME_LATCH_VEL = 0.050000
 HOME_SEQUENCE = 0