Build fails #12
Comments
|
Humm is that compiling with clang? And where dies cython come into the mix (we use cffi) |
|
All I'm doing is running the above commands to try to install cld2-cffi using pip. I'm not running cython or any other command. I'd be happy to test compiling with clang, but I don't know how that would work, since I've never used it. |
|
Can you send me thanks |
|
.... Nevermind That is a very very very new compiler, but let me see what can be done with it. |
|
So I am thinking the best solution to this is to get round to implementing #11, then you wont have to compile |
|
FWIW, here's |
|
BTW, it does look like this is a compiler issue--I was able to successfully compile the cfd2-cffi with an old GCC, using |
|
I am guessing that GCC 6 is more strict with narrowed strings (notice
that is the error)
I dont have the time to look into it right now, but I will try to figure
out how to cope with gcc6.
On Tue, Dec 6, 2016, at 05:06 PM, Jonathan Reeve wrote:
BTW, it does look like this is a compiler issue--I was able to
successfully compile the cfd2-cffi with an old GCC, using sudo env CC=/usr/bin/gcc-
5 pip install -U cld2-cffi.
— You are receiving this because you commented. Reply to this email
directly, view it on GitHub[1], or mute the thread[2].
|
|
I just ran into this error with GCC 6 also. As a workaround I did a |
* add failing en specs * add cld2 gem * Replace WhatLanguage with CLD
|
The following worked for me: pip install --upgrade 'git+https://github.com/GregBowyer/cld2-cffi.git@d048c5fa98066bdb130f1c7e52641a0645aef5ac'gcc (Gentoo 8.3.0-r1 p1.1) 8.3.0 |
Inlines the function strcasecmp from strings.h, which is not present on Windows. This should close Issue GregBowyer#12 and PR GregBowyer#15.
Was going to use textpipe, but dependency was too large and failed to install with halfway modern GCC (due to CLD2 issue): GregBowyer/cld2-cffi#12 So instead basically pulled out the clean_text function, which is quite short.
|
I had the same installation issue. The fix in branch Fix-21 worked for me. |
When I try to install cld2-cffi via
sudo pip install cld2-cffiorpip install -U cld2-cffi, this is what happens:The text was updated successfully, but these errors were encountered: